• Loading: Maximum live load is 1.25kN/m².
• Draft: Ranges from 250mm to 500mm.
• Freeboard: Nominally set at 450mm.
• Structure: Constructed with an all-welded mild steel aluminium frame using standard channel sections, cross-braced with rolled steel or extruded aluminium angles.
• Fixings: Decking is secured with 6 stainless steel screws per deck board. Structural connections use galvanised or stainless steel bolts.
• Flexible Connections: Utilizes compressed rubber blocks, through bolts, castle nuts, and split pins to ensure security and prevent misalignment while allowing vertical angular movement without noise.
• Climatic Conditions: Designed to withstand a maximum wave height of 300mm.
• Decking: Made of hardwood boards, machined and grooved for an anti-slip finish, fixed with stainless steel grade A4 self-tapping screws.
• Floats: Standard Walcon floats are made of fibre concrete protected expanded polystyrene.

• Fingers:
  • WHM1: 10.0 x 1.4m
  • WHM2: 10.0 x 1.05m
  • WHM3: 9.3 x 1.4m (Splayed end 2.3m wide)
  • WHM4: 12.0 x 1.4m (Splayed end 2.3m wide)

Walcon Marine Ltd reserves the right to change specifications without prior notice due to continuous product development. Contact details: Cockerell Close, Segensworth West, Fareham, Hampshire PO15 5SR, Tel. +44 (0)1489 579977, Email: [email protected]