Catalogs >
VULKAN Marine >
VULKAN_ISC_19 05 2011

VULKAN_ISC_19 05 2011
4Pages

Add to favorites

Catalog excerpts

INTEGRATED SHAFT COUPLING (ISC) GENERAL INFORMATION

Open the catalog to page 1

GeNeRaL iNFORMaTiON, WORKiNG PRiNCiPLe The new VULKAN Integrated Shaft Coupling (ISC) combines in a unique way the well proven RATO DS torsional rubber coupling with a double cardanic intermediate shaft. The working principle of the ISC is based on the fact that the RATO DS cou- It was found that the angular deflection of the RATO DS causes – even at high pling transmits the torque primarily by shear stresses in the rubber which misalignment levels – a rather low strain level compared to the torque load have a pre-dominant radial/circumferential component. Therefore the RATO and thus a low...

Open the catalog to page 2

posite iate shaft adVaNTaGeS Compared to pure torsional or conventional misalignment couplings the Integrated Shaft Coupling (ISC) offers the following advantages: Significant reduction of parts due to bearing less design. high misalignment capacity, low reaction forces. advantageous weight saving of the entire coupling. No noise transmission path through metallic or bearing parts. Up to seven meters long Composite intermediate shaft. extended torsional vibration tuning capabilities. iSC arrangement between electric motor and Z-drive gearbox RATO DS dual Adapter flange plate Hub

Open the catalog to page 3

TECHNICAL DATA Notice: In addition to the above shown technical data of the ISC all technical data and advises given in the RATO DS catalogue (issue 05/2011) apply without restriction to the DS elements. The present catalogue shall replace all previous editions, any previous printings shall no longer be valid. Based on new developments, VULKAN reserves the right to amend and change any details contained in this catalogue respectively. The new data shall only apply with respect to couplings that were ordered after said amendment or change. It shall be the responsibility of the user to ensure...

Open the catalog to page 4