Catalogs >
Volvo Penta >
D13-MG

D13-MG
4Pages

Catalog excerpts

VOLVO PENTA MARINE GENSET 12.78 liter, in-line 6 cylinder Volvo Penta Genset system Standard generator The Volvo Penta Genset systems are the complete solution for a ship’s onboard power requirements. You will not only get reliable marine diesels, well-matched generators and a monitoring system, but also a wide range of products and services to optimize your investment. The basis for the Volvo Penta Gensets is the smooth running and reliable marine diesel engines. Compact in design, they occupy less space in the engine room, and their good accessibility makes service and maintenance easy. Auto-start and synchronizing is rapid and reliable, meeting all standards with a comfortable margin. Volvo’s basic engine design in combination with a highly efficient speed control system gives superior load taking capability. All the standard Gensets are equipped with a generator built by Newage Stamford. Stamford is the market leader in this power range and provides for worldwide service coverage. These generators are of a long proven design, based on years of experience of power generation for land-based and marine applications. Each complete genset is delivered with Volvo Penta MCU (Marine Control Unit) alarm and monitoring system with interface for connections to the switchboard and bridge. For all classed gensets SDU (Shut down unit) will give full redundancy and safety according to SOLAS & class requirements. Each Volvo Penta Genset is built in the Volvo factory fully adapted to the customer’s requirements and comes complete and tested, ready for installation onboard. All the Volvo Penta Gensets are type approved by the major classification societies, and can be delivered under complete certification. Clean engine The Volvo Penta engines are well balanced and have excellent emission performance. No visible smoke can be recognized. With growing care for the environment all over the world, emission regulations are becoming increasingly stricter. The D13 MG is certified for the comprehensive emission requirements according to EPA Tier 2 and EU IWW for diesel electric propulsion. Engines are ready for EPA Tier 3 emission legislation, in force from 2014. Reduced noise The noise level on the D13 MG has been further reduced due to variable injector pressure and a new efficient cooling system. The harbor and emergency gensets with radiator cooling system can offer even lower sound pressure with an optional visco fan. Marine control unit Trouble free service Scheduled maintenance and preventive repairs will keep you from unnecessary and expensive downtime. For each genset application Volvo Penta dealers can offer extensive life cycle cost analysis including fuel and maintenance cost. Qualified Volvo Penta dealers stand by for service and support in more than 100 countries all over the world. A complete set of documentation will be delivered with the set according to Volvo’s high quality publication standard. The optional extended coverage (CXC) will give protection for one or two ad

Open the catalog to page 1

12.78 liter, in-line 6 cylinder Technical Data General Engine designation 4-stroke, direct-injected, turbocharged diesel engine with charge air cooler Displacement, liter Compression ratio Performance & fuel consumption Engine speed Spec. fuel consumption HE/KC, g/kWh at 50% load Recommended fuel to conform to 10% overload available acc. to class requirements. Fuel temperature 40°C (104°F). Technical data according to ISO 3046 Fuel Stop Power with a tolerance ±4%. Fuel with a lower calorific value of 42700 kJ/kg and density of 840 g/liter at 15°C (60°F). Merchant fuel may differ from this...

Open the catalog to page 2

12.78 liter, in-line 6 cylinder Technical Data KC Genset Engine / Generator 10% overload available according to class requirements. Fuel temperature 40°C (104°F). Technical data according to ISO 3046 Fuel Stop Power and ISO 8665. Fuel with a lower calorific value of 42700 kJ/kg and density of 840 g/liter at 15°C (60°F). erchant fuel may differ from this specification which will influence engine M power output and fuel consumption. H1 = Height including exhaust compensator H2 = Total genset height including control box Technical Data RC Genset Engine / Generator Engine / Generator 10%...

Open the catalog to page 3

12.78 liter, in-line 6 cylinder Technical description – High system efficiency as a result of system optimization of the complete Genset – All used components of highest quality from well reputed suppliers – Reinforced set dimensioned for high output and low sound level – Mono-block engine/generator rigidly mounted on a common bed frame – Engine directly coupled to generator via a flexplate – Flexible mountings including welding plates mounted under the frame – Cylinder block and cylinder head made of cast iron – One piece cylinder head – Replaceable wet cylinder liners and valve...

Open the catalog to page 4