FEATURES : Modern and minimalistic design – based on the same reader unit as forSignature 3G RFID locks. : Possible to limit access to floors according to each guest or staff keycard’s privileges. : 8 relay outputs to selectively enable the elevator call buttons is delivered as standard. : Extendable with up to 15 extra relay modules, each with 8 relay outputs. This gives a maximum of 128 relay outputs. : Can also control different devices such as electric strikes and motor locks. : Fully compatible with VingCard’s VISIONLINE system. : Ring around the reader can be delivered in black, Satin Chrome, Satin Brass, Polished Chrome or Polished Brass. RFID Elevator Controller For VISIONLINE electronic locking system VingCard's 3G RFID Elevator Controller for VISIONLINE system is designed to fit into elevator panels and can be operated off- or online. The security level of the hotel will increase, as only guests with a valid keycard will have access to the elevators.

Configuration overview of Elevator Controller in an online network: Art. no: 4819059 | Published:2011 | Doc. Printed: 10/2013 | Copyright VingCard Elsafe 2011 - 2013 © Power requirements: :: Maximum current consumption for the elevator reader: 150 mA continuously :: Maximum current consumption for each relay module: 100 mA continuously :: Maximum load of relay outputs: 0,6A@125VAC or 2A@30VDC Resistive Each complete unit, supplied individually packed, consists of: :: RFID Reader with frame in black, Satin Chrome, Satin Brass, Polished Chrome or Polished Chrome :: 20 m cable :: RS-485 Gateway...