Chapter 3. Card Operated Locks Remote Controller TO ORDER you must specify: •• finish •• lock set type, i.e. Classic, PIN or Signature •• reader type, i.e. magnetic stripe, combo or RFID •• surface or flush mounted model Application: •• controls electronic striker plates, motor locks and other devices such as car park barriers and gates •• off line design for easy installation and operation •• compatible for use with VingCard’s Classic and Signature systems •• choice of surface or flush mounted models Remote Controller Classic Operation: •• an encoded card from either VingCard’s Classic or Signature systems should be used •• insert and remove card and the controlled device will open and a green light will appear Technical Information: •• security access codes are encrypted on the keycard’s track number 3 •• service access only for authorized key holders •• weight: 2.6 kg (for Classic) Delivery: •• fixing plate •• housing assembly •• front assembly with LCU •• service access cylinder •• circuit diagram •• heating element is optional Classic surface: technical drawing Classic flush: technical drawing Remote Controller RFID RFID flush: technical drawing Dimensions: •• surface mounted: H 200 x W 83 x D 81 •• flush mounted: H 220* x W 103* x D 59** * Total size of rim around the front assembly ** Depth inside the wall Environmental Specifications: •• without heating element: card reader min.: 0 oC, max.: 50 oC •• with heating element: card reader min.: -30 oC, max.: 50 oC •• humidity: non condensing