Product Data Sheet The Pro 4 Plus BASE Remotely Operated Vehicle (ROV) system has been specifically configured to quickly and effectively perform advanced underwater imaging tasks. The Plus BASE ROV system is a portable and cost-effective solution that can be deployed in minutes and operated by one person if necessary. The Pro 4 Plus BASE system includes a Pro 4 submersible, Pro 4 Integrated Control Box (ICB) with a high performance Dell PC loaded with VideoRay Cockpit control software, secondary 15” Hi-Brite daylight viewable display, and an industrial hand controller. The Plus BASE configuration is ready to accept the majority of VideoRay accessories. The user must also select a tether configuration for this system. SYSTEM INFORMATION Depth Rating 305m (1,000 ft) System Weight 38.5 kg (85lbs) Communications Protocol RS-485 Cases 2 Watertight Rugged Hard Cases Owners Manual Hard Copy and Online Digital Tool Kit Basic Tool Kit and spares with complete Ballast Set Warranty 2 Year Limited Additional BlueView Sonar-Ready Hardware Sunshade

CONTROL PANEL Length 37.5cm (14.75in) Width 28.9cm (11.4in) Height 22.3cm (8.75in) Weight 6.1kg (13.5lb) Ballast Toolless Ballast System Configuration 3 thrusters (2 horizontal/1 vertical) Motor Type Brushless Thrust 4.1 knots Speed 100mm Propellers/65mm Propeller Type Optimized LED Arrays Number of Sources 2 Camera Coverage Forward-looking Beam Spread covers entire range of Main Camera Lumens 3,600 lumens per light (7,200 total) Integrated Sensors Accelerometer Leak Indicator Depth Sensor Water Temperature Power Requirements 100-240 VAC / 50/60 Hz 800 Watts (Max Power) Length 53cm (21in) Width...