Cygnus S1 Probe Handler for ROV Ship Hull Inspection Data Sheet The Cygnus S1 Probe Handler is designed for performing UT thickness surveys on ships’ hulls with an Observation or Light work class ROV. On contact with the hull plate two sets of magnets first grip the steel, then as the ROV pushes forward the UT probe is allowed to tilt to align it to the hull surface placing the UT probe in the optimal position for measurement with the ROV pilot just having to maintain gentle forward thrust while the measurement is taken. The S1 probe holder is constructed from acetyl with stainless steel fixings keeping the overall weight down. Dimensions Specifications 175 x 150 x 85 mm (6.9” x 6” x 3.3”) Excluding handle Depth Rating Black Acetyl with Stainless Fixings Probe Types 2.25 MHz 13mm with Membrane (3.5 MHz & 5MHz at special request) Probe Cable 0.95 m Coaxial (other lengths at special request) Warranty (Probe) Part Numbers Probe Options Part Numbers for Probes Ordering Information 001-8334 2.25 MHz Nosecone Nosecone for MiniROV When ordering the S1 Probe Handler you must order the appropriate Probe separately. Example. 001-8331 + 001-8334 = S1 Probe Holder and Probe with Nosecone Connection Cygnus Instruments Ltd. 30 Prince of Wales Road Dorchester Dorset DT1 1PW United Kingdom Tel: +44 (0) 1305 265533 Email: [email protected]