Catalogs >
Victron Energy >
Phoenix Inverters 180VA ? 1200 VA 230V/50Hz and 110V/60Hz

Phoenix Inverters 180VA ? 1200 VA 230V/50Hz and 110V/60Hz
2Pages

Catalog excerpts

Phoenix Inverters 180VA ? 1200 VA 230V/50Hz and 110V/60Hz - 1

Phoenix Inverters 180VA – 1200 VA www.victronenergy.com 230V/50Hz and 110V/60Hz SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix inverters, however, are well suited to power up difficult loads such as computers and low power electric tools. To transfer the load to another AC source: the automatic transfer switch For our lower power models we recommend the use of our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 miliseconds) so that computers and other electronic equipment will continue to operate without disruption. Phoenix Inverter 12/180 LED diagnosis Please see manual for a description. Remote on/off switch Connector for remote on off switch available on all models. Remote control panel (750VA model only) Connects to the inverter with a RJ12 UTP cable (length 3 meter, included). DIP switch for 50/60Hz selection (750VA model only) DIP switches for Power Saving Mode (750VA model only) When operating in Power Saving Mode, the no-load current is reduced to 1/3 of nominal. In this mode the inverter is switched off in case of no load or very low load, and switches on every two seconds for a short period. I f the output current exceeds a set level. The inverter will continue to operate. If not, the inverter will shut down again. The on/off level can be set from 15W to 85W with DIP switches. Phoenix Inverter 12/800 with Schuko socket Available with different output sockets Please see pictures below. Phoenix Inverter 12/350 with IEC-320 sockets Phoenix Inverter 12/800 with IEC-320 socket Phoenix Inverter 12/800 with Schuko socket Phoenix Inverter 12/180 with Schuko socket Phoenix Inverter 12/800 with BS 1363 socket Phoenix Inverter 12/180 with Nema 5-15R sockets Phoenix Inverter 12/800 with AN/NZS 3112 socket Phoenix Inverter 12/800 with Nema 5-15R socket

Open the catalog to page 1

Phoenix Inverters 180VA ? 1200 VA 230V/50Hz and 110V/60Hz - 2

12/180 24/180 12/350 24/350 48/350 Cont. AC power at 25 °C (VA) (3) 180 350 750 800 1200 Cont. power at 25 °C / 40 °C (W) 175 / 150 300 / 250 700 / 650 700 / 650 1000 / 900 350 700 1400 1600 2400 Phoenix Inverter 12 Volt 24 Volt 48 Volt Peak power (W) Output AC voltage / frequency (4) 12/800 24/800 48/800 48/750 12/1200 24/1200 48/1200 110VAC or 230VAC +/- 3% 50Hz or 60Hz +/- 0,1% Input voltage range (V DC) 10,5 - 15,5 / 21,0 - 31,0 / 42,0 - 62,0 9,2 - 17,3 / 18,4 - 34,0 / 36,8 - 68,0 Low battery alarm (V DC) 11,0 / 22 / 44 10,9 / 21,8 / 43,6 Low battery shut down (V DC) 10,5 / 21 / 42 9,2...

Open the catalog to page 2