- Catalogs
- Victron Energy
- Phoenix Inverter 3000VA - 5000VA
Phoenix Inverter 3000VA - 5000VA
Phoenix Inverter 3000VA - 5000VA
Victron Energy specializes in providing reliable power solutions for marine applications, ensuring the proper functioning of electrical equipment at sea. Their products cater to both recreational and professional sailors, offering freedom and independence.
Victron Energy products are utilized in various vessels, such as yachts and container ships. Notable examples include the Nordhavn 68 motor yacht and 'The Green Miles' adventure, which promotes sustainability through sailing.
Victron offers a range of system configurations, from simple DC systems to complex setups with inverters and generators. Key products include the MultiPlus and Quattro, which provide power assistance and can function as UPS systems. Systems can be configured for parallel and three-phase operations using VEConfigure software.
Victron provides accessories like battery monitors, control panels, and transfer switches, enhancing system functionality and allowing remote monitoring and control via the VRM Online Portal.
The document details technical specifications for products such as inverters, chargers, and batteries. Phoenix inverters, for example, offer high start-up power suitable for sensitive electronic equipment.
Phoenix inverters range from 1200VA to 5000VA, featuring true sine wave output, high efficiency, and compact design. They support parallel and three-phase operations and are equipped with a VE.Bus communication port for remote monitoring and system integration.
The document describes configuration procedures for stand-alone and parallel/three-phase applications, highlighting the use of VE.Bus Quick Configure and VE.Bus System Configurator software for system setup.
The inverters comply with safety standard EN 60335-1 and emission immunity standards EN 55014-1, EN 55014-2, EN 61000-6-2, and EN 61000-6-3.
For applications requiring an automatic transfer switch, the document recommends using the MultiPlus inverter/charger and the BMV Battery Monitor for advanced battery management.
High start-up power, parallel and three-phase operation capability, automatic transfer switch, computer interface for custom settings, and remote monitoring options.
Inverters are housed in an aluminum enclosure with IP 20 protection, including features like output short circuit, overload, and temperature control.
Operating temperature range is -40 to +50°C with fan-assisted cooling, and maximum humidity is 95% non-condensing.
The document provides detailed technical specifications and functionalities of Victron Energy's MultiPlus and Quattro inverter/charger systems, designed for efficient power management and compatible with Lithium-Ion batteries.
- MultiPlus Inverter/Charger: Models range from 800 VA to 5 kVA, compatible with 12V, 24V, and 48V systems, featuring PowerControl, PowerAssist, and a transfer switch.
- Quattro Inverter/Charger: Ranges from 3kVA to 10kVA, with dual AC inputs and outputs, allowing seamless power transition and parallel operation.
- Efficiency: High efficiency rates with peak power capabilities and low zero-load power consumption.
- Color Control Panel: Provides intuitive control and monitoring, compatible with a wide range of Victron products, supporting remote monitoring via the VRM Online Portal.
- Digital Multi Control Panel: Offers remote monitoring with adjustable PowerControl and PowerAssist levels.
- BMV Battery Monitor: Utilizes advanced microprocessor control for precise battery monitoring.
Systems can be remotely configured and monitored through Ethernet connections, with data accessible via the VRM website.
Products comply with safety and emission standards, ensuring reliable and safe operation.
Suitable for off-grid and grid-connected applications, supporting solar energy integration and providing uninterrupted power supply during grid failures.
The document outlines specifications for various power control and charging devices, including integrated transfer switches, dual AC inputs, and a frequency range of 45-65 Hz.
Describes the adaptive charging algorithm used in Blue Power Chargers, including stages like test, bulk, absorption, recondition, float, and storage.
Safety and emission standards include EN 60335-1, EN 60335-2-29, and EN 55014-1.
Use chargers in environments with temperatures ranging from -20 to +50°C, ensuring humidity does not exceed 95%.
Highlights high efficiency of chargers, low power consumption when fully charged, and the importance of using the adaptive charging algorithm.
Describes interfaces for remote monitoring and control, including VE.Bus to RS232, USB converters, and Ethernet connections.
The document provides detailed information about the Blue Power IP65 Charger and the Phoenix Battery Charger, designed for efficient and safe battery charging.
- Blue Power IP65 Charger: High efficiency, reverse polarity protection, temperature-compensated charging, and specific modes for lead-acid and Li-ion batteries.
- Phoenix Battery Charger: Features an adaptive 4-stage charge characteristic and includes a temperature sensor for charge voltage adjustment.
- Recovery Function: The Blue Power Charger can recharge fully discharged batteries by applying low current until sufficient voltage is restored.
- Reconditioning: For lead-acid batteries suffering from sulfation, the charger can reverse some damage by charging with low current to a higher voltage.
- Both chargers comply with safety standards EN 60335-1, EN 60335-2-29, and UL 1236.
- For prolonged connection, reduce charge voltage to prevent grid corrosion.
- Use temperature compensation to optimize charging based on ambient conditions.
- Blue Power IP65 Charger: Silent operation, protection against overheating, and automatic Li-ion under voltage protection reset.
- Phoenix Battery Charger: Adaptive charging, BatterySafe mode, and a computer interface for parameter customization.
- Charge curves for both chargers illustrate the stages of charging and the voltage/current relationship during each stage.
Victron Energy's chargers are designed for durability, efficiency, and adaptability to various battery types and environmental conditions, ensuring optimal battery performance and longevity.
The document outlines specifications for various battery chargers, including the Skylla-i and Skylla-TG models, designed for rugged environments with aluminum enclosures and IP21 protection.
Chargers feature advanced microprocessor control systems for precise charging, including temperature compensation and voltage sensing.
Chargers comply with safety standards EN 60335-1 and EN 60335-2-29, emission standards EN 55014-1, and immunity standards EN 55014-2.
Use temperature sensors and follow adaptive charging algorithms for optimal battery life.
Adaptive charging, BatterySafe mode, storage mode, temperature compensation, and Li-Ion readiness.
Highlights the BMV 700 Battery Monitor and Skylla Control for charge current adjustments.
Skylla chargers offer universal input and GL approval, featuring a three-step charging characteristic and the ability to function as power supplies.
Input voltage, charge voltage, and current capacities are detailed, with protection against short circuit, reverse polarity, high voltage, and high temperature.
Tailored for maritime applications, providing necessary monitoring and alarm functions.
Ensure safety by eliminating electrical continuity between shore power and the boat, preventing galvanic corrosion.
Offer high efficiency and IP43 protection, with models available for both isolated and non-isolated applications.
High efficiency, IP43 protection, remote on-off capability, adjustable output voltage, and short circuit proof.
Products comply with relevant safety and emission standards.
The document provides detailed specifications and features of Victron Energy's Orion DC-DC converters, including both isolated and non-isolated models.
Orion DC-DC converters are available in different power ratings, with key specifications including input voltage ranges, output voltage, efficiency, and operating temperature ranges.
Converters feature remote on-off capabilities, adjustable output voltage, and IP43 or IP67 protection.
Converters comply with several standards, including EN 60950 for safety and EN 61000-6-3 for emission.
Guidance on installation, highlighting the need for proper orientation and connection.
Brief mention of the Blue Power Panel for intuitive control of devices connected to the VE.Net network.
The document provides detailed information about Victron Energy's products, focusing on the Blue Power Panel GX, Color Control GX, and Cyrix battery combiners.
Offers full control and monitoring of connected VE.Net devices, with real-time system status readouts.
Provides intuitive control and monitoring for a wide range of Victron products, supporting remote monitoring via the VRM Online Portal.
CCGX supports various Victron products, allowing for monitoring and control with data logging capabilities.
Intelligent devices that manage battery connections based on voltage trends, offering features like bidirectional voltage sensing and emergency start capabilities.
Includes detailed technical specifications for the Color Control GX and Cyrix battery combiners.
Installation guidelines for the Color Control GX, including the use of USB and microSD cards for firmware updates and data logging.
Victron Energy's products offer comprehensive solutions for energy management and monitoring, with a focus on ease of installation and robust connectivity options.
The document provides technical specifications and operational guidelines for Victron Energy's Cyrix battery combiners and related products.
Cyrix battery combiner connects batteries in parallel under specific voltage conditions.
Cyrix can be manually engaged to connect batteries in parallel for 30 seconds in emergencies.
Details various Cyrix models, each with specific features like LED status indicators and protection mechanisms.
Victron Global Remote 2 and Victron Ethernet Remote provide system information remotely, sending alarms and system status reports via SMS.
Installation guidelines for the Global Remote and Ethernet Remote, highlighting the VRM Online Portal for remote monitoring.
BMV-700 series battery monitors offer features like state of charge display and midpoint voltage monitoring.
The document provides detailed technical specifications and features of Victron Energy's battery monitoring and balancing products, including the BMV series and Argo Diode and FET Battery Isolators.
- Monitors battery voltage, current, power, ampere-hours consumed, and state of charge.
- Includes programmable alarms and relays for managing loads and generators.
- VE.Net Battery Controller and Lynx Shunt options for high voltage systems.
- Essential for detecting failed batteries or cells in series-connected systems.
- Allow simultaneous charging of multiple batteries without connecting them together.
- Equalizes the state of charge in series-connected batteries.
- Products comply with various safety and emission standards.
- Install the Battery Balancer on a well-ventilated vertical surface near the batteries.
- LiFePO4 batteries are safer, have a nominal voltage of 3.2 V per cell, and do not require full charging, improving service life.
- A BMS is crucial to prevent cell damage from under or over-voltage and to balance cells.
- Various models with capacities ranging from 60 Ah to 200 Ah, with or without BMS interface.
The document provides detailed technical specifications and operational guidelines for Victron Energy's 12 V Battery Management System (BMS) and 24 V 180 Ah Lithium-Ion Battery System.
- Power Port AB prevents discharge of the starter battery by the LFP battery.
- High energy density, high charge and discharge currents, long battery life, and high efficiency.
- Lithium-Ion Battery: Nominal voltage of 26.4 V, capacity of 180 Ah, and power of 4.75 kWh.
Victron Energy's BMS and Lithium-Ion Battery System offer robust solutions for managing battery safety and efficiency in various applications.
The VE.Bus Battery Management System (BMS) is designed to protect individual cells of Victron lithium iron phosphate (LiFePO4) batteries.
The BMS includes Load Disconnect and Charge Disconnect outputs.
The system features LED indicators to show the status of VE.Bus products and battery conditions.
The BMS can manage up to ten parallel batteries and four series-connected batteries.
Victron VRLA batteries, including AGM and Gel types, are maintenance-free and have low self-discharge rates.
The document discusses the effects of temperature on battery capacity and service life.
Recommended charge voltage settings for Victron VRLA batteries are provided.
1. 12 Volt Deep Cycle GEL Batteries: Float design life of 12 years at 20°C and a cycle design life of up to 1800 cycles at 30% discharge.
2. 2 Volt Long Life GEL Batteries: Float design life of 20 years at 20°C and a cycle design life of up to 4500 cycles at 30% discharge.
3. 12V AGM Telecom Batteries: Designed for telecom applications with a cycle design life of up to 1000 cycles at 30% discharge.
1. MPPT Charge Controllers: Feature ultra-fast Maximum Power Point Tracking (MPPT).
2. BlueSolar Monocrystalline Panels: Offer high performance with a 25-year limited warranty on power output.
3. BlueSolar Polycrystalline Panels: Provide exceptional low-light performance.
Advanced EVA encapsulation systems, high-performance bypass diodes, and sturdy anodized aluminum frames for solar panels.
The document outlines specifications for BlueSolar polycrystalline panels with nominal power ranging from 20W to 290W.
Describes the MultiPlus inverter/charger system, which includes features like PowerControl and PowerAssist.
Examples of system configurations include the Comfort system with a 7 kVA capacity and the Comfort plus system with a 25 kVA capacity.
Victron Energy is highlighted as a leader in self-supporting electrical power solutions, with over 40 years of experience.
Catalog excerpts
Energy. Anytime. Anywhere.
Open the catalog to page 1
Energy. Anytime. Anywhere. INDEX Introduction4 Application examples 5 Motor yacht Nordhavn 68 6 The Green Miles 8 Systems10 Accessories14 Technical information 17 About Victron Energy 94
Open the catalog to page 3
Whether you sail for fun or on a professional basis, it is of the utmost importance to have a reliable power supply for all the electrical equipment to properly function, even in the middle of the sea. Victron Energy offers a broad range of products that are extremely suitable for your onboard power system. We proudly present you our modern translation for freedom and independence.
Open the catalog to page 4
Energy. Anytime. Anywhere. Application examples Our products are being used in many different kinds of vessels: sailing yachts, cruise ships, sloops, tugboats, motor boats and container ships. To give you an idea of the possibilities of the use of our products, we gathered a few application examples. Motor yacht Nordhavn 68
Open the catalog to page 5
Motor yacht Nordhavn 68 US, California: Pacific Asian Enterprises/Nohavn Yachts This 68 feet (20.73 meters) motor yacht is the forward pilothouse model of the Nordhavn 68 series. Everything you need for a comfortable stay is on board of this yacht: a large saloon, an outdoor living space, a galley, a laundry room, a master cabin and guest cabins. The rooms on board of the Nordhavn 68 series are finished in teak. Appliances The yacht is modernly decorated and equipped with a long list of comfort and convenience features: the galley is fullly equipped with first-rate appliances, including a Sub-Zero...
Open the catalog to page 6
Energy. Anytime. Anywhere. System schematic Photos: Stephen Cridland Nordhavn 68 ‘Zorro’ - Seattle, Washington. Photo: Stephen Cridland
Open the catalog to page 7
The Netherlands: a self-directed adventure There are some exciting adventures in this world, where you often wish you were a part of the story. Such an example might be Joshua’s story. At age 28, he is sailing around the world, visiting the most wonderful and exotic of places. Places most of us can only dream of. Sailing: a self-directed adventure During his travels, Joshua’s aim is to engage others in discussions concerning sustainability and the preservation of nature. Additionally he hopes to teach children a little about his home in The Netherlands along the way. He achieves this, in part,...
Open the catalog to page 8
Energy. Anytime. Anywhere. Phoenix charger Phoenix Multi Control PHOE MULTI CO NIX NTR OL inverter on boost equalize charger only Phoenix inverter shore current limiter Battery 1 status 13.25V +5A 78% bulk absor ption mains charger failure back battery charger This continuous dut cha y rger is ignition Pr otected per ISO 8846 CAU TION : do not ex pose to rain or spray WARNING electrical shock hazard ; A GFCI must be installed in the AC supply circuit. Disconnect the supply before opening panel and before making or breaking the connections of the battery Starter battery Florian Dirkse and Arjen...
Open the catalog to page 9
Systems There are many ways to build a Victron Energy system. Here are a few examples of different systems, from a simple system with only DC consumers to larger parallel and three-phase systems. 1. Simple system with only DC consumers The battery charger charges the battery and functions as a power supply for the consumers. blue power charger blue power charger 12 - 15 Amp Shore power Blue Power battery charger 2. System with inverter This system contains an inverter to ensure a supply of 230VAC at all times. Many charger models have three outputs which allow for several battery groups to be...
Open the catalog to page 10
Energy. Anytime. Anywhere. 3. Multi-functional The MultiPlus is a charger and inverter in one. It can function as a UPS (Uninterruptable Power Supply) to ensure power supply when the input power source fails. The MultiPlus also offers several other functional advantages such as PowerControl and PowerAssist. Digital Multi Control panel PowerAssist: boosting the capacity of shore or generator power This unique Victron feature allows the MultiPlus to supplement the capacity of the shore or generator power. Where peak power is so often required only for a limited period, the MultiPlus will make sure...
Open the catalog to page 11
Systems 5. Using a DC Generator In this MultiPlus-based system example the generator directly charges the batteries and/or feeds the inverters. This system offers a lot of advantages such as weight reduction and comfort. MultiPlus Digital multi control panel PHOENIX MULTI CONTROL inverter on shore current limiter Shore power AC OUT 1 AC OUT 2/ boiler Alternator DC OUT Starter battery 6. Using an AC Generator This system example is based on a Quattro, which forms the heart of the system. Depending on how high the demand for power is, the Quattro will choose between battery- shore- and generator...
Open the catalog to page 12
Energy. Anytime. Anywhere. 7. Parallel system Our inverters, Multi’s and Quattro’s can be paralleled to meet higher power requirements. A simple setting with our VEConfigure configuration software is sufficient. 3 x MultiPlus PHOENIX MULTI CONTROL inverter on shore current limiter Easy to configure Configuring parallel and three phase systems is easy. Our VEConfigure software tool allows the installer to put components together, without any hardware hanges or dipswitches. Just using standard products. 8. Three-phase system Similar to connecting units in parallel they can also be connected in...
Open the catalog to page 13
Accessories Our systems are comprised of various components. Some of which are specifically designed for specific markets. Other Victron components are applicable for a wide range of applications. You are able to find the specifications and other detailed information about these components in the ‘Technical Information’ section. Battery Monitor Key tasks of the Victron Battery Monitor are measuring charge and discharge currents as well as calculating the state-of-charge and time-to-go of a battery. An alarm is sent when certain limits are exceeded (such as an excessive discharge). It is also...
Open the catalog to page 14
Energy. Anytime. Anywhere. Accessories Filax 2: the ultra fast transfer switch The Filax has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source typically is the mains, a generator or shore power. The alternate source typically is an inverter. BatteryProtect (Models: BP-50, BP-100, BP-220) The BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. Shore power cable...
Open the catalog to page 15All Victron Energy catalogs and brochures
Blue Smart IP22Charger1 Page
Blue Smart Charger2 Pages
MPPT 250/60 and MPPT 250/702 Pages
BMV-712 Smart2 Pages
Centaur Charger2 Pages
Quattro Inverter/Charger120V2 Pages
Isolation Transformers2 Pages
Telecom Batteries1 Page
Cyrix-ct 12/24V120A and 230A2 Pages
Cyrix Li-ion 230A series2 Pages
Cyrix Li-ion 120 A series2 Pages
BatteryProtect1 Page
Phoenix Battery Charger2 Pages
Skylla 24/48V2 Pages
EasySolar 12V & 24V, 1600VA2 Pages
Gel and AGM Batteries4 Pages
Color Control GX4 Pages
Shore Power Cable1 Page
Battery Balancer2 Pages
Lynx Shunt VE.Can32 Pages
Filax 21 Page
2021 Marine120 Pages
BlueSolar PWM-Pro1 Page
Mobility8 Pages
Energy Storage64 Pages
EasyPlus4 Pages
Autotransformer 120/240V -2 Pages
BatteryProtect 48V-100A1 Page
2016 Marine108 Pages
Skylla-i Battery Charger 24V2 Pages
Quattro 3kVA - 10kVA 230V2 Pages
Autotransformer 32A and 100A2 Pages
solarswitch8 Pages
vgr4 Pages
victron multipower4 Pages
ECOmulti2 Pages
Brochure marine108 Pages
BlueSolar MPPT 150/701 Page
BlueSolar MPPT 100/151 Page
BMV-700 series2 Pages
Skylla-i2 Pages
Quattro2 Pages
Phoenix Charger2 Pages
Archived catalogs
Converters2 Pages
Marine Alternator6 Pages
Phoenix Inverter2 Pages
Battery Monitor2 Pages
Centuar Charger2 Pages
Phoenix MultiPlus2 Pages