*mynauticexpo

Catalogs
Victron Energy
EasySolar 12V & 24V, 1600VA

EasySolar 12V & 24V, 1600VA

Product catalog summary

Overview
The document describes the EasySolar, an all-in-one solar power solution by Victron Energy. It integrates a MPPT solar charge controller, an inverter/charger, and AC distribution into a single enclosure, simplifying installation with minimal wiring.

Specifications

Solar Charge Controller: Blue Solar MPPT 100/50, capable of connecting up to three strings of PV panels using MC4 connectors.
Inverter/Charger: MultiPlus Compact available in 12/1600/70 or 24/1600/40 models, sharing DC battery cables with the MPPT charge controller. It supports charging via solar power or AC power from the grid or a generator.
AC Distribution: Includes a RCD (30 mA/16 A) and four AC outputs protected by circuit breakers. One 16A output is controlled by AC input availability.
PowerAssist Technology: Prevents overload of utility or generator supply by adding inverter power when necessary.

Software and Connectivity
Unique solar application software (Assistants) is available for configuring grid-interactive or stand-alone applications. The system supports VE.Direct communication.

Technical Details

Inverter: Input voltage range of 9.5 – 17V (12V model) or 19 – 33V (24V model), with a continuous output power of 1600VA/1300W at 25°C and peak power of 3000W.
Charger: AC input voltage range of 187-265 VAC, with a charge current of 70A (12V model) or 40A (24V model) for house batteries.
Solar Charge Controller: Maximum output current of 50A, maximum PV power of 700W (12V model) or 1400W (24V model), and maximum efficiency of 98%.
Common Characteristics: Operating temperature range of -20 to +50°C, humidity up to 95% non-condensing, and IP 21 protection category.

Standards and Compliance
The product complies with safety standards EN 60335-1, EN 60335-2-29, EN 62109, emission/immunity standards EN 55014-1, EN 55014-2, EN 61000-3-3, and the Automotive Directive 2004/104/EC.

Protection Features
Includes protection against output short circuit, overload, high/low battery voltage, high temperature, 230 VAC on inverter output, and high input voltage ripple.

Catalog excerpts

EasySolar 12V and 24V, 1600VA The all-in-one solar power solution z All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. Please see http://www.victronenergy.nl/support-and-downloads/software/ Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40 E-mail: [email protected] | www.victronenergy.com

Open the catalog to page 1

Inverter/charger Transfer switch Input voltage range ‘Heavy duty’ output AC 0 16 A Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1% (1) Output AC1, 2, 3 Cont. output power at 25°C (3) Cont. output power at 40°C Peak power Maximum efficiency Zero load power Zero load power in search mode CHARGER Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1 AC Input Charge voltage 'absorption' Charge voltage 'float' Storage mode Charge current house battery (4) Charge current starter battery (A) Battery temperature sensor Solar Charge Controller Model Maximum output current Maximum...

Open the catalog to page 2

All Victron Energy catalogs and brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list