Blue Smart IP22Charger


Catalog excerpts

Blue Smart IP22Charger - 1

Bluetooth Smart The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test - bulk - absorption - recondition - float - storage The Blue Smart Charger features a microprocessor controlled 'adaptive' battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to 'equalize' the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure. Also charges Li-ion (LiFePO*) batteries LiFePO4 batteries are charged with a simple bulk - absorption - float algorithm. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION. Blue Smart IP22 Charger Input voltage range Charge current, normal mode Charge current, NIGHT or LOW Efficiency No load power consumption Frequency Number of outputs Charge voltage 'absorption' Charge voltage 'float' Charge voltage 'storage' Charge algorithm Can be used as power supply Protection Operating temp. range Humidity (non-condensing) Material & Colour Battery connection 230 V AC connection Protection category Weight Dimensions (h x w x d) Safety Emission Immunity Automotive Normal: 14,4V High: 14,7V Li-ion: 14,2V Normal: 13,8V High: 13,8V Li-ion: 13,5V Normal: 13,2V High: 13,2V Li-ion: 13,5V 6-stage adaptive Yes Battery reverse polarity (fuse) Output short circuit -20 to +50°C Max 98% Normal: 28,8V High: 29,4V Li-ion: 28,4V Normal: 27,6V High: 27,6V Li-ion: 27,0V Normal: 26,4V High: 26,4V Li-ion: 27,0V Over temperature Aluminium (blue RAL 5012) Screw terminals 13 mm2 / AWG6 Cable of 1,5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ) IP22 1,3 kg 235 x 108 x 65 mm victron energy I cine d n u/ r □ Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands General phone: +31 (0)36 535 97 00 | E-mail:

Open the catalog to page 1

All Victron Energy catalogs and brochures

  1. Marine

    120 Pages

  2. Filax 2

    1 Pages

  3. Mobility

    8 Pages

  4. Energy Storage

    64 Pages

  5. EasyPlus

    4 Pages

  6. Marine

    108 Pages

  7. solarswitch

    8 Pages

  8. vgr

    4 Pages

  9. Brochure marine

    108 Pages

  10. Skylla-i

    2 Pages

  11. Quattro

    2 Pages

  12. ECOmulti

    2 Pages

Archived catalogs

  1. Converters

    2 Pages