Catalogs >
Vetrotex - OCV Reinforcements >
MultiEndRov_R63SX3

MultiEndRov_R63SX3
2Pages

Catalog excerpts

OCV™Reinforcements PRODUCT INFORMATION Roving For Injection And Compression Molding Compounds PRODUCT DESCRIPTION R63SX3 Roving is a collection of continuous glass strands gathered without mechanical twist and wound into a cylindrical package. The strands are bonded together with a medium soluble polyester-compatible silane (R63S) size. R63SX3 Roving is produced using Advantex® glass fiber. Advantex® glass fiber combines the electrical and mechanical properties of traditional E-glasses with the acid corrosion PRODUCT APPLICATION R63SX3 is designed for use as a reinforcement forthermoset injection and compression molding compounds and gives good run-out and chopping performance together with particularly good mechanical and surface properties in finished moldings. TECHNICAL CHARACTERISTICS (NOMINAL VALUES) VISUAL CHARACTERISTICS OR POSSIBLE DEFECTS The roving shall be firmly and evenly wound with uniform lay, equal traverse length and straight package build. A package that has (inside the build or on its surface) visible grease, oil, dirt or other foreign matter, 3 mm or less in diameter is rejectable if the total number of defects exceeds three. A package is also rejectable if it contains one of such defects greater than 3 mm in diameter.

Open the catalog to page 1

Roving For Injection And Compression Molding Compounds PRODUCT AVAILABILITY The balls are wrapped in plastic film (Tack-pak®) and palletised at 36 rovings per pallet using 3 layers of 12 rovings linked In a Creel-Pak® configuration enabling 6 ends to be run simultaneously. Pallets are wrapped with plastic film for external protection with a plastic film. Other packaging types can be considered under consultation. Each pallet should contain an identification label mentioning: R63SX3 roving using Advantex® should be stored dry, in its original packaging. The best conditions are temperature...

Open the catalog to page 2