PRODUCT INFORMATION Multi-End Roving for Input and Chopping PRODUCT DESCRIPTION The 956 Multi-End Roving is manufactured from a collection of continuous glass filaments, gathered, without mechanical twist, into multiple bundles. The filaments that make up the bundles are bonded together with a high performance polyester/vinylester compatible silane based sizing. The 956 sizing is compatible with polyester/vinylester resin systems as well as some polyurethane 956 Multi-End Roving is produced using Advantex® glass fiber. Advantex® glass fiber combines the electrical and mechanical properties of traditional E glasses with the corrosion resistance of E-CR glass. Advantex® glass meets the requirements stated of PRODUCT APPLICATION 956 Multi-End Roving is designed for use in the manufacture of Headliners or Sheet Molding Compounds (SMC) for use in the consumer and automotive markets. FEATURES AND PRODUCT BENEFITS Superior Laminate Properties Excellent Runnability First Rate Flow Characteristics Excellent Choppability Excellent Sheet Density Excellent Wetting Characteristics Optimum Package and Pallet Weight TECHNICAL CHARACTERISTICS (NOMINAL VALUES) VISUAL CHARACTERISTICS OR POSSIBLE DEFECTS Roving doffs are square-edged, cylindrical packages which are firmly and evenly wound and have a constant traverse length. The packages are designed to provide a smooth runout, and their geometry is controlled to maintain the desired run out performance. Unless otherwise specified, packages (doffs) are connected using an 8-way air splice.

Multi-End Roving for Input and Chopping PRODUCT AVAILABILITY • Product available as 4023 Package 68 doffs/pallet (30.4kg/doff) • Product is offered with tails on short side of pallet • Product also available as 4093 package 50 doffs/pallet on 38x51 " pallet tails on long side of pallet • Air Spliced Tack-Pak® Wrap Vertical Creel-Pak® Unless otherwise specified, it is recommended to store glass roving products in a cool dry area. Storage temperature should not exceed 95°F (35°C) and the relative humidity should be kept below 75%. Pallets should not be stored more than two high. Triple stacking...