M723A
2Pages

Catalog excerpts

OCV™Reinforcements PRODUCT INFORMATION Chopped Strand Mat For Conformability PRODUCT DESCRIPTION M723AÍS a medium-fine fiber, rapid wetting chopped strand mat and is composed of silane sized multi-length (one to two inch) chopped glass filament bundles that average 16,500 yards/pound (30 tex or g/km). It is bonded together with a small amount of highly soluble powdered polyester binder and is designed to be randomly oriented and multi-resin compatible. This product is produced using Advantex® glass fiber. Advantex® glass fiber combines the excellent mechanical and electrical properties of traditional E-glasses with the acid resistance of E-CR TECHNICAL CHARACTERISTICS (NOMINAL VALUES) VISUAL CHARACTERISTICS OR POSSIBLE DEFECTS • Excellent dry handling characteristics for consistent unrolling, part/kit cutting and manipulation • Superior wet tensile strength for pre-wetting processes and easier placement and adjustment • Exceptional roll density for fewer roll changes and reduced handling • Superior mechanical properties and resin compatibility • Lloyd's Register, Det Norske Veritas and Germanischer Lloyds certifications

Open the catalog to page 1

Chopped Strand Mat For Conformability PRODUCT AVAILABILITY The mat is wound on a 101.6 mm (4") inside diameter tube to an approximate outside roll diameter of 279.4 mm (11"). The mat rolls are packaged to provide adequate protection during shipping and storage as well as minimizing waste for the customer. Each roll is individually enclosed in Cling-Pak® wrap, stood vertically, and palletized nine (16) rolls per pallet. The pallet load is banded with tape and Cling-Pak® wrapped. Identification: Each roll shall display a label with the following information (in both Imperial and SI units...

Open the catalog to page 2