Product Information Chopped Strand Mat Product Description M720 is a medium-fine fiber, rapid wetting chopped strand mat that is composed of multi compatible saline sized chopped glass fibers, bonded together with a small amount of highly soluble polyester powder binder. This product is produced using Advantex® glass fiber. Advantex® combines the excellent mechanical and electrical properties of traditional E-glass with the acid resistance of E-CR glasses. Advantex® qualifies as an E-CR glass per ISO 2078 and DIN 1259 and as an E-glass per ASTM D578-98. PRODUCT REFERENCE PRODUCT APPLICATION Example : M720 1.0 oz 50″ M720 : Product designation 1.0 oz : Nominal aerial weight (oz/sq ft) 50” : Roll width (in) M720 can be used for • Matched Metal Die wet molding • Open mold applications requiring highly conformable mat Features and PRODUCT Benefits • Highly comfortable • Easily torn by hand • Advantex® offers superior corrosion resistance over STD E-glass • Multi-compatible (even epoxy) PRODUCT AVAILABILITY ROLL Characteristics Nominal mat weight (gm/m2) Nominal full roll length Nominal full roll weight Roll width

Chopped Strand Mat PACKAGING Roll-up: The mat is wound on a 4” (10.16 cm) inside diameter tube to an approximate outside roll diameter of 11” (27.94 cm). Roll Lengths and Weights: The approximate weights and lengths of full rolls for standard products are shown in chart below. Standard Packaging: The mat rolls are packaged to provide adequate protection during shipping and storage as well as minimizing waste for the customer. Each roll is individually enclosed in Cling Pak® wrap, stood vertically, and palletized 16 rolls per pallet. The pallet load is banded with tape and Cling-Pak® wrapped....