M710B
2Pages

Catalog excerpts

Product Information Mat for Hand Lay-Up Product Description M710B is a randomly oriented chopped strand mat product composed of multi length glass fiber strands. The strands are coated with a saline coupling agent and are bonded together in mat form using a small amount ofhighly soluble polyester powder. M710B is produced using Advantex® glass fiber. Advantex® glass fiber combines the electrical and mechanical properties of traditional E-glasses with the acid corrosion resistance of E-CR glass. Advantex® meets the requirements stated of both E and E-CR glass PRODUCT APPLICATION M710B is designed to be compatible with polyester, epoxy and vinylester resins and used both as gel coat backup and standard laminate reinforcement for most contact molding applications where quick wetting, rapid air release, good conformability and low resin consumption are desired. TECHNICAL CHARACTERISTICS (nominal values) weight (GSM)

Open the catalog to page 1

Mat for Hand Lay-Up PRODUCT AVAILABILITY weight (GSM) Each pallet of mat is labeled on the outside with the following information: • Product code • Width of the roll • Date of manufacture • Weight of roll • Team • Number of the roll The mat is wound on a 10 cm inside diameter carton tube to an overall outside diameter of approximately 32 cm. The M710B mat should be stored in its original packaging in a dry and cool place. Best conditions are at temperature from 10 to 35°C and humidity between 35 and 85%. If you store the product at lower temperatures, please move the soon-to-be-processed...

Open the catalog to page 2