M6X1 MAKE LARGE, THICK PARTS EASIER AND FASTER Product Benefits M6X1 chopped strand mat represents a compelling solution for large and thick part manufacturing when high productivity is required in hand lay-up or closed mold processes. • Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. • Made of medium Tex multi-chop length strands bonded together with an emulsion binder. • Certified by Lloyd’s Register of Shipping. Easy Handling and Moldability • Optimized chop length mix provides superior dry tensile strength while bringing good conformability to contoured molds. High-Process Efficiency • Fast wet-through and low resin pick-up combined with excellent handling properties in dry and wet conditions. This makes the product an ideal choice for large and thick parts production with dry and wet-carrying process. Enhanced Service Life • Compared to standard E-glass, Advantex® glass helps with enhanced service life in applications facing corrosion. M6X1 mat is designed for use with polyester, vinyl ester resin systems in hand lay-up or closed mold applications including automotive parts, boats, chemical tanks and pools. Product Data Sheet | M6X1 |

M6X1 is available in Europe. Additional weights and widths are available upon request by your Owens Corning contact. NOMINAL MAT WEIGHT (G/M2) Each roll is wound on a 76 mm cardboard tube and placed inside a polyethylene bag and cardboard box. The boxed product is then placed vertically on a wooden pallet and shrink-wrapped for stability and protection. Each roll bears a label detailing the product description, product code, nominal weight, roll width, roll number, and date of manufacture. NOMINAL MAT WIDTH (CM) ROLL DIAMETER (CM) ROLLS PER PALLET Unless otherwise specified, it is recommended...