M123
2Pages

Catalog excerpts

PRODUCT INFORMATION Chopped Strand Mat for Hand Lay-up This product is produced using Advantex® glass fiber. Advantex® glass fiber combines the electrical and mechanical properties of traditional E-glass with the acid corrosion resistance of E-CR PRODUCT DESCRIPTION The M123 chopped strand mat is made with medium size strands of Advantex® Glass Roving, held together by a powder binder which is extremely soluble in styrene. The basic strand has a sizing system containing a silane coupling agent. This sizing system combined the binder properties make M123 suitable with epoxy, vinylester and anti-corrosion resins. PRODUCT REFERENCE OCV™ Reinforcements product code number of trimmed edges (zero, one or two) FEATURES AND PRODUCT BENEFITS Good drapability Good resistance to watering and chemical agents in anti- corrosion applications Easy impregnation Approved by Lloyd's Register • High tensile strength, suitable for filament winding or continuous laminating Approved by Det Norske Veritas • Excellent clarity of the UP laminates Approved by Croatian Register TECHNICAL CHARACTERISTICS (NOMINAL VALUES) VISUAL CHARACTERISTICS OR POSSIBLE DEFECTS Unbound edges Dirt spots (greater than 5 mm) Unopened strands Each 100 m2 roll of chopped strand mat section may contain at most six of the defects listed above.

Open the catalog to page 1

Chopped Strand Mat for Hand Lay-up PRODUCT AVAILABILITY (ROLL CHARACTERISTICS) Additional weights (from 80 to 900 g/m2) and widths (from 10 to 320 cm) are available upon request. A roll is considered to be complete if it measures more than 70% of the nominal length • Each roll is wound on a cardboard tube (internal diameter 101 mm) and packaged in an individual cardboard box, 40 x 40 (L x W); the height is equal to the width of the mat. • Nine standard rolls are packed vertically on a pallet, secured by shrink-wrap polythene. The pallet is wrapped with polyamide straps. Special packaging:...

Open the catalog to page 2