LD5 Integrated Mobile Unit
2Pages

{{requestButtons}}

Catalog excerpts

LD5 Integrated Mobile Unit - 1

PRODUCT SHEET LD5 INTEGRATED MOBILE UNIT RELIABLE POSITIONING UNIT VERIPOS LD5 is a ruggedised integrated sensor with a modern, user-friendly interface designed to meet a range of demanding offshore positioning requirements. The LD5 utilises VERIPOS positioning algorithms and supports all VERIPOS services which can produce position accuracies from metre to better than <5 cm at 2 σ (95%). The internally installed SD card permits logging of data, allowing post-processing and post-mission analysis if required. The VERIPOS LD5 is a robust and reliable positioning unit which is available in a number of configurations, from a basic L-Band demodulator to a fully integrated mobile positioning unit with demodulator and multi-frequency GNSS receiver. The unit can easily be upgraded to different configurations depending on your requirements. Installation and set up of the LD5 is simple and straightforward. The onboard colour display and intuitive menu structure make the configuration and operation of the LD5 user friendly. The display also provides the user with valuable real-time position and status information. The LD5 can also be used as a sensor to output raw GNSS measurements and VERIPOS augmentation data in RTCM format. This can be used by external visualisation or quality control software, such as VERIPOS Quantum. Data can be output through three galvanically isolated serial ports configurable for either RS232 or RS422. Data is also available through a USB port or an Ethernet port. The LD5 is suitable for a wide range of applications including hydrographic/offshore surveying, dredging, offshore construction, seismic exploration and dynamic positioning.

Open the catalog to page 1
LD5 Integrated Mobile Unit - 2

TECHNICAL SPECIFICATIONS Physical Characteristics Receiver Size: Aluminum Housing, 90 mm (H) x 158 mm (W) x 227 mm (D) Weight: 2.25 kg Display: MMI colour screen and keypad Operating Temp: -15°C to 55°C Storage Temp: -20°C to 70°C Input Voltage: 12 to 24V DC Consumption: Basic Configuration - <4 W Intermediate Configuration - <7.2 W Enhanced Configuration - <7.5 W The LD5 Integrated Mobile Unit on-board colour display. Data Ports and Interfaces • 3 Serial Connectors: 9 way D EIA-232/422 • Galvanically Isolated • USB Device-Type B Socket • Ethernet-RJ45 • 1PPS-BNC VERIPOS L-Band Demodulator...

Open the catalog to page 2

All Veripos catalogs and brochures

  1. ViNE

    2 Pages

  2. GAJT-710MS

    2 Pages