VMH FLEX Easy to install, easy to customize, easy to use.

VMH FLEX Tiny device / endless possibilities GE NER A L FE AT UR E S Up to 5 scrollable screens in single or dual layout Innovative laser touch-button reliable in every practical condition CAN bus connectivity (NMEA 2000® or J1939) 2x analog inputs for direct sensor connections LIN port for Intelligent Battery Sensor Wireless configurable with your smartphone DISPLAY LAYOUT Small but powerful, the VMH Flex is the perfect compromise to display a large amount of boat data in a compact device. No matter if you are wearing gloves or if it is raining on your deck, the innovative laser touch-button...

Up to 10 different displayed data on five scrollable screens NMEA 2000® DeviceNet NMEA 2000® M12 connector on harness included NMEA 2000® marine protocol implemented on CAN Analog to NMEA 2000® converter included to send data and alarms to the boat network! SAE J1939 protocol implemented on CAN port Open-end wiring harness DM1 diagnostic messages from the engine with SPN and FMI display SUPPORTED DATA SUPPORTED DATA Battery SOC Battery SOH Battery Temp Battery Autonomy Ammeter Voltmeter Alternator Potential Engine Speed Hour Counter Boat Speed SOG COG Coolant Temp Coolant Press Boost Press Engine...

Touch button area Touch buttonHandtight area 26,5 Touch button area Active Area 4 Nm max. torque Rear view Molex MX 150, 8 poles-connector Wire harness - J1939 Version Wire harness - NMEA Versions Handtight max. torque 4 Nm max. torque 4 Nm Term. 15 – Power 12 /524 V 1 Term. 31 – Ground Sensor input – Resistiv 1 (0-400 Ω) Veratron AG / Industriestrasse 18 / 9464 Rüthi / Switzerland T +41 71 7679 111 / [email protected] / veratron.com The information provided in this brochure contains only general descriptions or performance characteristics, which do not always apply as described in case of actual...