UEM UNIVERSAL ENGINE MONITORS UEM-IDS-001
4Pages

{{requestButtons}}

Catalog excerpts

UEM UNIVERSAL ENGINE MONITORS UEM-IDS-001 - 1

UNIVERSAL ENGINE MONITORS UEM-IDS-001 UNIVERSAL ENGINE MONITORS PLUG AND PLAY ENGINE MONITORS DESIGNED TO BE USED WITH ALL ENGINE TYPES. INCLUDING ANALOGUE, J1939 & NMEA 2000 ENGINES. The range incorporates a variety of types and screen sizes from a round 3” display to a slimline 7” display. Each model of display has varying levels of the number and type of inputs. The software is common across the range supporting inputs from Analogue, J1939 and NMEA 2000 engines that can be configured via the setup menu. The UEM software provides selectable icon based display layouts; including a comprehensive text based fault warning and acknowledgement system and a series of “hidden until lit” alarm lamps. Primary display options include parameters related to Engine Status, and Alarms as well as Fuel Level, Rudder Angle, Trim, Depth, Speed and Heading. Data is available in several formats and measurement units. Key Features: Compatible with Multiple Engine Types / Brands All Common Engine Parameters Shown All Triggered Alarms Shown NMEA 2000 Gateway For Transmission to Other MFDs Compatible with Multiple Engine Types / Brands IP67 All-Round Protection Plug and Play Installation Button Operated and Touch Screen Models Available Kit Includes: Display Preloaded with UEM Software Protective Cover Harness Cabling Selectable Options Either: Universal Including (J1939, NMEA2000 and Analogue) or J1939 only The UEM includes a “gateway” feature that converts inputs (including Analogue signals, J1939 and NMEA0183 for GPS) to NMEA 2000 allowing engine data to be broadcast for display on other onboard multi-function displays. VEETHREE TECHNOLOGIES 4A Upton Industrial Estate Factory Road, Poole Dorset, BH16 5SJ, UK

Open the catalog to page 1
UEM UNIVERSAL ENGINE MONITORS UEM-IDS-001 - 2

UNIVERSAL ENGINE MONITOR Range Comparison R3 Display range Screen Size Type PCAP Touch PCAP Touch PCAP Touch Data Types / Sources J1939 NMEA2000 Analogue Inputs Gateway to NMEA2000 GPS Input External Alarm Diagnostics J1939 DM1 J1939 DM2 CAN Logger CAN Viewer Display / Electrical Power Requirements Connection Deutsch Ports M12 Ports Environmental / Mechanical Operating Temp Degree of Protection Dimensions (mm) Kit Part Numbers Universal* (J1939, NMEA2000 and Analogue) *Required to support gateway function **No gateway ***Analogue not available on the R3s VEETHREE TECHNOLOGIES 4A Upton Indu

Open the catalog to page 2
UEM UNIVERSAL ENGINE MONITORS UEM-IDS-001 - 3

UNIVERSAL ENGINE MONITOR Software The UEM software includes typical functions used in the Marine sector, offering user friendly selectable icon based display layouts (gauge, numeric, graph or bar) and includes a comprehensive multi language text based fault warning and acknowledgement system. Configuration options written in the software give the ability to connect to mechanical engines as well as engines with an ECU. KEY FEATURES Compatible with virtually any Engine Type or Sender Gateway feature converts incoming data to NMEA 2000 for output to other multi-function displays Full J1939 DM1...

Open the catalog to page 3
UEM UNIVERSAL ENGINE MONITORS UEM-IDS-001 - 4

UNIVERSAL ENGINE MONITOR Example Screens Our products continue to be successfully deployed in an enormously diverse range of applications where total reliability is vital. Displays are also supported with a return to base extended 24-month Manufacturer warranty against mechanical failure or material defects. R3 3” round touch display C3l 3.5” low profile colour display VEETHREE TECHNOLOGIES 4A Upton Industrial Estate Factory Road, Poole Dorset, BH16 5SJ, UK

Open the catalog to page 4

All Veethree Electronics and Marine LLC catalogs and brochures

  1. Sahara Line

    4 Pages

  2. Eclipse Line

    4 Pages

  3. Amega Line

    5 Pages

  4. Premier Line

    5 Pages

  5. Lido Line

    5 Pages

  6. Argent Line

    5 Pages

  7. Arctic

    4 Pages

  8. gps receiver

    1 Pages