UEM - Universal Engine Monitor
4Pages

{{requestButtons}}

Catalog excerpts

UEM - Universal Engine Monitor - 1

UNIVERSAL ENGINE MONITORS UEM-UDS-001 UNIVERSAL ENGINE MONITORS PLUG AND PLAY ENGINE MONITORS DESIGNED TO BE USED WITH ALL ENGINE TYPES. INCLUDING ANALOG, J1939 & NMEA 2000 ENGINES. The range incorporates a variety of types and screen sizes from a round 3” display to a slimline 7” display. Each model of display has varying levels of the number and type of inputs. The software is common across the range supporting inputs from Analog, J1939 and NMEA 2000 engines that can be configured via the setup menu. The UEM software provides selectable icon based display layouts; including a comprehensive text based fault warning and acknowledgement system and a series of “hidden until lit” alarm lamps. Primary display options include parameters related to Engine Status, and Alarms as well as Fuel Level, Rudder Angle, Trim, Depth, Speed and Heading. Data is available in several formats and measurement units. Key Features: Compatible with Multiple Engine Types / Brands All Common Engine Parameters Shown All Triggered Alarms Shown NMEA 2000 Gateway for Transmission to Other MFDs IP67 All-Round Protection Plug and Play Installation Button Operated and Touch Screen Models Available Kit Includes: Display Preloaded with UEM Software Protective Cover Harness Cabling Selectable Options Either: Universal Including (J1939, NMEA2000 and Analog) or J1939 only The UEM includes a “gateway” feature that converts inputs (including Analog signals, J1939 and NMEA0183 for GPS) to NMEA 2000 allowing engine data to be broadcast for display on other onboard multi-function displays. VEETHREE ELECTRONICS 2050 47th Terrace East Bradenton, FL 34203

Open the catalog to page 1
UEM - Universal Engine Monitor - 2

UNIVERSAL ENGINE MONITORS Range Comparison Screen Size Part Number PCAP Touch PCAP Touch PCAP Touch Display range Type Brightness Data Types / Sources J1939 NMEA2000 Analog Inputs Gateway GPS Input External Alarm Diagnostics J1939 DM1 J1939 DM2 CAN Logger CAN Viewer Display / Electrical Power Requirements Connection Deutsch Ports M12 Ports Environmental / Mechanical Operating Temp Degree of Protection Dimensions (Inch) *Required to support gateway function **No gateway

Open the catalog to page 2
UEM - Universal Engine Monitor - 3

UNIVERSAL ENGINE MONITOR Soft ware The UEM software includes typical functions used in the Marine sector, offering user friendly selectable icon based display layouts (gauge, numeric, graph or bar) and includes a comprehensive multi language text based fault warning and acknowledgement system. Configuration options written in the software give the ability to connect to mechanical engines as well as engines with an ECU. KEY FEATURES Compatible with virtually any Engine Type or Sender Gateway feature converts incoming data to NMEA 2000 for output to other multi-function displays Full J1939 DM1...

Open the catalog to page 3
UEM - Universal Engine Monitor - 4

UNIVERSAL ENGINE MONITORS Example Screens Our products continue to be successfully deployed in an enormously diverse range of applications where total reliability is vital. Displays are also supported with a return to base extended 24-month Manufacturer warranty against mechanical failure or material defects. R3 3” round touch display C3l 3.5” low profile color display VEETHREE ELECTRONICS 2050 47th Terrace East Bradenton, FL 34203

Open the catalog to page 4

All Veethree Electronics and Marine LLC catalogs and brochures

  1. Sahara Line

    4 Pages

  2. Eclipse Line

    4 Pages

  3. Amega Line

    5 Pages

  4. Premier Line

    5 Pages

  5. Lido Line

    5 Pages

  6. Argent Line

    5 Pages

  7. Arctic

    4 Pages

  8. gps receiver

    1 Pages