Technical data SUNLIGHT READABLE INGRESS PROTECTION OPERATING TEMP 3.5” COLOUR DISPLAY FORMERLY THE VEECAN™ 320 LP, IS THE LOW PROFILE VARIANT IN THE RANGE OF 3.5″ COMPACT COLOR CAN BUS DISPLAYS. The C3l is an addition to the rugged CAN bus display family from Veethree. It is a fully sunlight viewable 3.5 inch color display, which is compact and highly flexible with a low profile bezel. The high brightness QVGA (320 x 240 pixels) color display is fully sunlight viewable and the unit is totally sealed. Using the powerful Freescale iMX 286 ARM processor running Linux, programmers can quickly put together a project using our proprietary software developer’s kit (SDK) and the proven Veethree component based library. Application software is able to be rapidly validated on a PC using the PC simulator. It has a larger, more accessible and stylized keypad, which is backlit for ease of operation at night. Electrically and environmentally rugged, the C3l provides durable, flexible instrumentation for the harshest of environments. It is also available in a low voltage variant to act as a controller during low voltage events. VEETHREE ELECTRONICS 2050 47th Terrace East Bradenton, FL 34203

3.5” COLOR DISPLAY Reliability Our products continue to be successfully deployed in an enormously diverse range of applications where total reliability is vital. All products, bespoke or standard range are backed up by a dedicated central team of specialist engineers able to rapidly adapt any product for a specific application and to provide an unrivalled level of customer support. Displays are also supported with a return to base extended 24-month Manufacture warranty against mechanical failure or material defects. Soft ware Our SDK is offered for a one-off licence fee from which customers can...

3.5” COLOR DISPLAY Specifications Case material FLASH Memory Case color 116mm (W) x 116mm (H) Front x 41mm rear (D) and 96mm rear (WxH) Input/Output / Communications 7 Analog Inputs Switch Contact to ground or open collector type sensor - max. frequency = 50 Hz Magnetic pick up or hall effect & similar with push-pull output - max. frequency = 5 KHz 4 Relay / Solenoid Outputs Open collector suitable 0.5A continuous load. Active Area Viewing Angle 130/110 degrees from 6 O'clock Contrast Ratio Power Requirements Internal Buzzer Part Number (1) 12 Pin Deutsch DT04-12PA Moulded in Receptacle Mates...

3.5” COLOR DISPLAY Connectors Sensor 1 Analog Input Ground & Power Sensor 2 Analog Input Sensor 3 Analog Input Sensor 4 Analog Input Sensor 5 Analog Input Sensor 6 Analog Input Sensor 7 Analog Input Digital Input/Flow Sensor 1 Digital Input/Flow Sensor 2 Tachometer Input Mates with DT06-12SA Note 1. (10-32V DC) Supply should be protected by 500 mA – Rated circuit breaker/fuse. IMPORTANT NOTICE Safety Warning: Please note analog input voltages should not exceed the supply voltage or damage may occur. No power should be present on the harness during connection. USB port should not be used for charging...