Technical data OPERATING TEMP 3.5” COLOR DISPLAY C3, FORMERLY THE VEECAN™ 320, IS THE FULL VARIANT IN THE RANGE OF 3.5″ COMPACT COLOR CAN BUS DISPLAYS. The C3 has a 3.5inch color LCD with fully integrated input and output features. One of our most popular displays, it is available in 4 variants with low profile, reduced I/O combinations and low voltage to act as a controller during low voltage events. The display is part of the family of compact, flexible, and rugged CAN bus monitors. With 7 analog inputs, 4 relay outputs combined with 3 digital inputs, 2 CAN input connections, plus a USB port the C3 allows maximum function The QVGA color display can be viewed in full sunlight, the unit is totally sealed and electronically extremely durable. The display can provide system control functions, alarm functionality, and has configurable data logging capability. It is equipped to meet the challenge of providing tough, flexible, maintenance free instrumentation in even the harshest of environments. Using the powerful Freescale iMX 286 ARM processor running Linux, programmers can quickly put together a project using our proprietary software developer’s kit (SDK) and the proven Veethree component based library. Application software is able to be rapidly validated on a PC using the PC simulator. VEETHREE ELECTRONICS 2050 47th Terrace East Bradenton, FL 34203

3.5” COLOR DISPLAY Reliability Our products continue to be successfully deployed in an enormously diverse range of applications where total reliability is vital. All products, bespoke or standard range are backed up by a dedicated central team of specialist engineers able to rapidly adapt any product for a specific application and to provide an unrivalled level of customer support. Displays are also supported with a return to base extended 24-month Manufacture warranty against mechanical failure or material defects. Soft ware Our SDK is offered for a one-off licence fee from which customers can...

3.5” COLOR DISPLAY Specifications Case material FLASH Memory Case colour 95mm (W) x 95mm (H) Front x 23mm rear (D) and 23mm forward. Active Area Viewing Angle 130/110 degrees from 6 O'clock Contrast Ratio Power Requirements Internal Buzzer Connection Communications Switch Contact to ground or open collector type sensor - max. frequency = 50 Hz Magnetic pick up or all effect & similar with push-pull output - max. frequency = 5 KHz Open collector suitable 0.5A continuous load (2) 12 Pin Deutsch DT04-12PA Moulded in Receptacle C3 3.5” CAN Display with Engine Monitor Software Preloaded C3 3.5” CAN...

3.5” COLOR DISPLAY Connectors Primary Sensor 1 Analog Input Ground & Power* Sensor 2 Analog Input Sensor 3 Analog Input Sensor 4 Analog Input Sensor 5 Analog Input Sensor 6 Analog Input Sensor 7 Analog Input Digital Input/Flow Sensor 1 Digital Input/Flow Sensor 2 Tachometer Input Mates with DT06-12SA *Note 1. (10-32V DC) Supply should be protected by 500 mA – Rated circuit breaker/fuse. IMPORTANT NOTICE Safety Warning: Please note analog input voltages should not exceed the supply voltage or damage may occur. No power should be present on the harness during connection. USB port should not be...