Vacmobile MICRO 8/2 Compact vacuum system for smaller composite parts Integral resin trap with 2 litre (4 pint) capacity catchpot The Vacmobile MICRO is suitable for resin infusing or vacuum bagging small to medium sized parts up to about 20 m2 (215 ft2) in area, as long as the resin overflow from the part will be less than 2 litres (4 pints). Although small in size, the MICRO is a heavy duty machine suitable for industrial use, field repairs, training/research and high quality hobby composites. With a noise output of just 60 dB(A), the MICRO is ideal for quiet environments. The MICRO can be supplied in bench-top format or complete with a mobile docking station. Bench-top format Transport mode in docking station Working mode on docking station Length - 373 mm (14.7”) Width – 345 mm (13.6”) Height – 468 mm (18.4”) Weight – 20.5 kg (45.2 lb) Length – 465 mm (18.3”) Width – 345 mm (13.6”) Height – 623 mm (24.5”) Weight – 30 kg (66.1 lb) Length – 465 mm (18.3”) Width – 345 mm (13.6”) Height – 1,055 mm (41.5”) Weight – 30 kg (66.1 lb) Special features The Vacmobile MICRO vacuum system is complete with an integral resin trap, vacuum gauge, vacuum regulation, paper element inlet filter and motor overload protection. Robustly constructed from proven Vacmobile components, including our unique O-ring sealed trap lid tubing connections, vacuum integrity is assured over a long working life. A mobile docking cart is optional. Vacuum pump PVR EM 8/B. 50 Hz capacity 8.5 m³/h (5 cfm). 60 Hz capacity 10 m³/h (5.9 cfm). Power supply 230 V + 5%, 50/60 Hz single phase. Sorry 110 V, 60 Hz not yet available. Vacuum level Adjustable from approximately 20% vacuum to the pump’s maximum vacuum: 20 mbar, 98% vacuum, 15 Torr, 29.3” Hg, -14.4 psi, -99.3 kPa. (Higher vacuum capabilities to special order). Resin catch pot 2 litres (4.2 US pints). Trap lid connections 2 connections in 4 optional sizes to suit the following outside diameter extruded tubes: 3/8” to 10 mm, 1/2” to 13 mm, 5/8” to 16 mm, or 19 mm to 3/4”. On all standard tubing sizes, high integrity vacuum connections are quickly and reliably achieved at the trap lid via O-ring seals on the outside of the tube. Trap lid options Pressed steel lid (catchpot contents not visible under vacuum), or toughened glass lid (which allows catchpot contents to be viewed at all times). The toughened glass lid is recommended for infusion applications. Warranty Full repair/replacement warranty applicable worldwide. B11301A MICRO P1 of 1 16 David McCathie Place, PO Box 78, Silverdale, Auckland, New Zealand Email: [email protected] Website: www.vacmobiles.com Tel: +64 9 426 4095 Fax: + 64 9 426 1902