1 Vacuum Pump 1 Resin Trap For Resin Infusion | Vacuum Bagging MODULAR mobile vacuum system for manufacturing composite parts The Vacmobile 2S is a single pump / single resin trap MODULAR mobile vacuum system for manufacturing composites using processes such as resin infusion and vacuum bagging. The Vacmobile 2S is based on a sturdy but light weight mobile docking cart. The bottom level of the cart will accommodate a range of vacuum pumps up to 28 m3/h in capacity with 230 V/50 Hz power, or 12.7 cfm with 115 V/60 Hz power. While there are a number of resin trap lid and vacuum control options for the resin trap on the upper level of the cart, the maximum resin catching capacity is always 12 litres (3.1 US gallons). When infusing large parts, the resin trap (complete with vacuum controls) may be removed from the mobile docking cart and remote mounted. Although we recommend having access to at least 2 vacuum systems when infusing resin into large and high value composites, our largest pump capacity Vacmobile 2S machines may be used to infuse up to approximately 200 m2 (2,150 ft2) or laminate – as long as the resin overflow can be limited to 12 litres (3.1 US gallons). If this is insufficient, the machine’s resin trap may be used as a manifold for up to 8 supplementary resin traps. Perfect for both infusers of large parts and new infusers The large resin catching capacity and the user-friendly controls make the Vacmobile 2S the ideal solution for users at both ends of the laminating spectrum. While an excellent machine for experienced laminators infusing large parts, the 2S is the perfect “peace of mind” solution for users new to infusion – where the risk of accidental resin overflow is greater. Customised from standard modules to meet your requirements The Vacmobile 2S is a flexible, module-based machine, able to accommodate a range of vacuum pump sizes, vacuum control and resin trap lid configurations. Considerable opportunity exists to tailor-make a 2S system to suit your specific requirements. The Vacmobile 2S is the ideal choice for laminators searching for a compact, high-performance vacuum system for resin infusion or vacuum bagging. Configuration options Resin trap lid options Pump options (sorry, not all available for 115 V) Vacuum control options

1 Vacuum Pump 1 Resin Trap For Resin Infusion | Vacuum Bagging Typical 2S MODULAR components Modules slide and lock into place without tools! Primary modules 1. Mobile docking cart 2. Vacuum pump, with on-board electrics 3. Resin trap Vacuum pump • Choice of sizes (sorry, not all available for 115 V/60 Hz power) Resin trap lid • With/without viewport • Choice of tubing connection sizes • Choice of number of tubing connections Resin trap controls • 2 control optons Specifications Vacuum pump 230 V + 5% Single phase 115 V + 5% Single phase 1 of the following continuous duty oil sealed vacuum pumps:...