2S HD
2Pages

Vacmobile 2S HD 1 vacuum pump 12 litre resin trap The well proven vacuum system for manufacturing infused, or vacuum bagged composite parts e h T Simple to use and maintain, the Vacmobile 2SHD has been purpose designed for vacuum applications in composites including resin infusion, vacuum bagging and pre-preg laminating. This is an updated version of our system that has been used around the world since 2010 by composite manufacturers, training facilities and research institutes. The Vacmobile 2SHD is based on a sturdy, but I would like to congratulate you lightweight and mobile, docking cart. for putting in so much attention The bottom station of the cart will and thought. It must be the first accommodate the vacuum pump time that I feel that what we models shown on page 2. The top bought was worth every station of the cart accepts the very penny.” effective Vacmobile RT19 resin trap. Instinct Marine This resin trap has resin catching (Boatbuilder, UAE) capacity of 12 litres (3.1 US gallons). Up to 8 of Vacmobiles’ high integrity O-ring sealed vacuum connections can be made available on the resin trap lid. With the unique locking system, both the pump module and the resin trap module can be replaced with back-up modules in less than a minute. This is great for peace of mind when making high value laminates. 2S 1 Vacuum pump 1 Resin trap Although we recommend having access to at least 2 vacuum systems when infusing large and high value composites, a single Vacmobile 2SHD machine will comfortably infuse laminates up to 170 m2 (1829ft2) and larger, as long as the resin overflow from the laminate can be limited to 12 litres (3.1 US gallons). For information on controlling the resin overflow from infused laminates, please see our website note “Peel ply resin breaks” (http://www.vacmobiles.com/peel_ply_resin_breaks.html). End Vacuum Adjustment Valve (EVA Valve) now standard on high vacuum VSV-28 pump The 0.5 mbar VSV-28 vacuum pump has the EVA valve fitted as standard. This precisely adjustable valve significantly improves the versatility of the Vacmobile 2SHD (especially when used in conjunction with the optional absolute pressure gauge). With the EVA valve closed, the pump will achieve a high level of vacuum for the final stages of drying the reinforcement BEFORE infusion, or for degassing low volatility resins such as most epoxies. With the EVA valve open, the pump’s end vacuum can be preset to any vacuum level between 1 mbar (99.99% vacuum) and 100 mbar (90% vacuum). The EVA valve allows previously difficult laminating situations such as high moisture content reinforcements, or high volatility resins (such as most ester type resins) to be managed without the risk of creating porous laminates. For example, if the vapour pressure of water is 40 mbar at the ambient temperature of the day, the EVA Valve may be set to limit the pump’s vacuum to 50 mbar (or greater) to avoid water vapour boil-off. Gas Ballast Operation The VSV-28 vacuum pump has a three-stage gas ballast. This gives even more flexibility to handle moisture content from composites. When the valve is closed, this suits standard conditions. Position 1 & 2 are used for increased moisture conditions to allow the gases to exit the pump. This feature allows the pump to handle even the most demanding of compos

Vacmobile 2S HD Customizable solutions to suit your requirements Because of the modular nature of the Vacmobile 2SHD, there is considerable assembly flexibility to meet specific needs. While two standard pump models are offered, one in the 230 volt market and one pump model in the 115 volt market, special purpose pumps can be fitted to order if they will fit in the docking cart. The trap lid can be customized to provide from 1 to 8 tubing connections from a choice of 5 tubing sizes, and can be supplied with or without external illumination of the internal catchpot. A very effective resin...