Catalogs >
Underwater Lights - Sea Vision >
SV55 LED Surface Mount

SV55 LED Surface Mount
3Pages

Catalog excerpts

surface mounted light utilizing the latest high powered LED’s. The rugged bronze/nylon design is suitable for any boats where a thru hull design is unsuitable due to access and space restrictions. Ideal for trailerable boats. SV55 LED technical specifications Application for: GRP / fiberglass / wood hulls –––––––––––––––––––––––––––––––––––––––––––––– Lamp: 12 LED modules –––––––––––––––––––––––––––––––––––––––––––––– Available in: White, Blue –––––––––––––––––––––––––––––––––––––––––––––– Life length: Approx. 30,000 hours –––––––––––––––––––––––––––––––––––––––––––––– Kelvin colour temp: 6500 Lumens: 3744 –––––––––––––––––––––––––––––––––––––––––––––– Glass lens: Convex crown glass Thickness: 0.93”/ 23.5mm Diameter: 2.2” / 57mm –––––––––––––––––––––––––––––––––––––––––––––– Power supply: 10 – 32V – 0.75 Amps 24V/1.25Amps 12V –––––––––––––––––––––––––––––––––––––––––––––– Casing material: Marine Bronze – Black Nylon Dimensions: Diameter: 3.94” / 100mm Depth: 1.84” / 46.8mm –––––––––––––––––––––––––––––––––––––––––––––– Weight: 1.4kg / 3lbs –––––––––––––––––––––––––––––––––––––––––––––– Code: SV55 Surface Mounted –––––––––––––––––––––––––––––––––––––––––––––– Total shipping weight: 1.8kg / 4lbs –––––––––––––––––––––––––––––––––––––––––––––– Installation: Recommended at least 5 – 6” (125-150mm) below waterline between 3-6 feet (1-2 meters) apart. The placement of surface mounted underwater lights on the hull bottom or sides is not recommended. ——————————————————————— All information is subject to change without prior notice, please confirm details prior to ordering. 1881 W State Road 84, Bay 102, Fort Lauderdale, FL 33315 USA T. 954 760 4447 Toll Free 1 866 772 0130 F. 954 525 3261 sales@seavision.com www.seavision.com

Open the catalog to page 1

SURFACE MOUNTED, LED ARRAY, Congratulations on the purchase of your new surface mounted LED light (Patent Pending). Underwater Lights® USA, LLC takes pride in providing well designed, high quality and thoroughly tested lights that allow you to "enhance your boating experience". These lights can be installed in your vessel for aesthetics, to attract fish and/or for security and safety. General Operating Information: The commercial grade Light Emitting Diode (LED) technology used in this light will provide robust and reliable operation under normal operating conditions. This light is equipped...

Open the catalog to page 2

SURFACE MOUNTED, LED ARRAY, 10-32 VDC Installation: This light should be installed at least 125-150mm (5-6”) below the water line by qualified/approved personnel using proper tools and materials. After selecting a flat mounting surface on the vessel hull, drill a 12mm (1/2”) diameter hole for electrical cable routing. Apply marine grade sealant to back of light, then attach using three Phillips Flat Head Screws (9). Note: Depending upon mounting surface material, three small pilot holes may be required. Caution! Check that no electrical wiring, fuel lines, oil lines, water lines etc., pass...

Open the catalog to page 3