Patent Pending he improved Gen II SV44 is a high powered eight LED surface mounted underwater light. The unique elongated domed lens provides a wide angled lighting effect in the water which eliminates the need for multiple lights on smaller boats and reduces the number of lights required on larger boats. Corrosion is eliminated with the use of a thermally conductive polymer, CoolPoly®, thermoplastic housing. The durable borosilicate lens makes cleaning the light simple. Bonding is not required which further simplifies the installation procedure. Available in blue or white colors this light is ideal for any boat requiring surface mounted underwater lights. Application for: Fiberglass / wood hulls ——————————————————————— Glass Lens: Convex cylindrical ——————————————————————— Power Supply: 11-28 volt d.c. - 0.75 Amps 24V/1.5 Amps 12V ——————————————————————— Light Source: White or blue LED array ——————————————————————— Life Length: Approx. 30,000 + hours ——————————————————————— Kelvin color temp: 6500K Lumens: 1826 ——————————————————————— Dimensions: Length: 6.46” (164mm) Height: 1.73” (44mm) Thickness: 1.14” (29mm) ——————————————————————— Construction: Black nylon and black thermoplastic ——————————————————————— Total shipping weight: 2 lbs ——————————————————————— Installation: Fastened to a flat surf

I ntroduction: Congratulations on the purchase of your new surface mounted LED light (Patent Pending). Underwater Lights® USA, LLC takes pride in providing well designed, high quality and thoroughly tested lights that allow you to “enhance your boating experience”. These lights can be installed in your vessel for aesthetics, to attract fish, for security and safety. General Operating I nform ation: The commercial grade Light Emitting Diode (LED) technology used in this light will provide robust and reliable operation under normal operating conditions. The light can be operated for a brief period...

I nstallation: This light should be installed at least 125-150mm (5-6”) below the water line by qualified/approved personnel using proper tools and material. The placement of surface mounted underwater lights on the hull bottom or sides is not recommended. Important! To prevent lense breakage, mounting surface must be flat and have no raised imperfections. To prevent mounting tab breakage, carefully and evenly tighten the three Phillips Pan Head Screws (11) by hand using a screwdriver (do not use power tools!). For cable existing at top - After selecting an appropriate flat surface on the vessel...