*mynauticexpo

SV14alum

Product catalog summary

Introduction: The Sea Vision SV14 is a weld-in underwater light designed for aluminum hulls. It uses a 150-watt HID metal halide lamp and operates on 110-230 volt AC power. The light can be installed in the transom or hull and adjusted to angles between 0 to 50 degrees to suit various hull shapes. Installation requires the vessel to be hauled out, but maintenance can be performed while the vessel is in water.

Technical Specifications: The SV14 features a 150-watt HID metal halide lamp with a lifespan of approximately 3,000 hours, producing 12,000 lumens at a color temperature of 7500 Kelvin. It has a borosilicate glass lens and an aluminum 5086 casing. The power supply options are 120 VAC with a running current of 1.33 amps or 230 VAC with a running current of 0.59 amps. The light is available in different angles with varying dimensions and weights.

Installation Guidelines: The light should be installed at least 10 inches below the waterline and spaced 3-8 feet apart. It must be welded into the hull following standard shipbuilding practices. High-temperature silicone cable is required between the light and ballast, while standard ship cable can be used from the ballast to the power supply.

Operating Information: The lamp requires a cooling period of 10-20 minutes after being turned off before restarting. It reaches full brightness in about 2 minutes and should be left on for at least 10 minutes to prevent flickering. The light can be operated briefly out of water but should primarily be used in water for proper cooling.

Safety and Maintenance: Regular inspections for moisture and marine growth are recommended every six months. The light becomes part of the vessel's grounding and cathodic protection system upon installation. Power should be disconnected before any maintenance work.

Warranty and Support: The product comes with a two-year warranty against defects, excluding lamps. Misuse or improper installation voids the warranty. Technical support is available from Underwater Lights USA, LLC.

Catalog excerpts

aluminum weld in underwater light  he Sea Vision SV14 weld in model for aluminum hulls can be installed in the transom or the hull, it utilizes a 150 watt HID metal halide lamp and 110-230 volt AC power. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0 to 50 degree. The vessel must be hauled out for installation although lamp change and any maintenance can be done in the water from within the hull. SV 14 (Aluminum) 50 degree mount shown. Application for: Aluminum hulls –––––––––––––––––––––––––––––––––––––––––––––– Lamp: 150 watt HID metal halide –––––––––––––––––––––––––––––––––––––––––––––– Life length: approx. 3,000 hours plus –––––––––––––––––––––––––––––––––––––––––––––– Lumens: 12,000 –––––––––––––––––––––––––––––––––––––––––––––– Kelvin colour temp: 7500 –––––––––––––––––––––––––––––––––––––––––––––– Glass lens: Borosilicate glass –––––––––––––––––––––––––––––––––––––––––––––– Thickness: 12.7mm / 0.5" Diameter : 58.0mm / 2.3"" " –––––––––––––––––––––––––––––––––––––––––––––– Power supply: 120 VAC 50/60Hz input - running current 1.33 amps 230 VAC 50/60Hz input - running current 0.59 amps –––––––––––––––––––––––––––––––––––––––––––––– Casing material: Aluminum 5086 Dimensions: 0-30 degree - 120mm x 175mm / 4.75” x 7” 24-38 degree - 140mm x 175mm / 5.5” x 7” 38-50 degree - 140mm x 175mm / 5.5” x 7” –––––––––––––––––––––––––––––––––––––––––––––– Angles available: 0-30 degree - weight 1.13 Kg / 2.5 lbs code: SV14 Alu 30 deg 24-38 degree - weight 2.72 Kg / 6 lbs code: SV14 Alu 38 deg 38-50 degree - weight 4.10 Kg / 9 lbs code: SV14 Alu 50 deg ——————————————————————— SV18 120 VAC 50/60 Hz 230 VAC 50/60 Hz ——————————————————————— Weight: 1.9 Kg / 5 lbs ——————————————————————— Cable: Only required between the light and ballast (maximum distance 50 feet / 15 meters). High temperature silicone 18/3 shielded copper wire. Normal ships cable can be used from the ballast to the power supply. ——————————————————————— Code: SV 14-Alu ——————————————————————— Total shipping weight: 10-30 degree - 6 Kg / 13.5 lbs 24-38 degree - 7 Kg / 15 lbs 38-50 degree - 8 Kg / 17 lbs ——————————————————————— Installation: Recommended at least 10” (250mm) below the waterline between 3-8 feet (1-2.5 meters) apart. This is a guideline only, for specific requirements please contact us. ——————————————————————— Note: Please specify voltage when ordering. All information is subject to change without prior notice, please confirm details prior to ordering. 1881 W State Road 84, Bay 102, Fort Lauderdale, FL 33315 USA T. 954 760 4447 Toll Free 1 866 772 0130 F. 954 525 3261 [email protected] www.seavision.com

Open the catalog to page 1