he Sea Vision SV14 LED weld in model for aluminum or steel hulls can be installed in the transom or the hull, it utilizes high density LED chip technology which combined with the latest award winning silicone optics produce an industry leading lighting effect. Additionally the silicone optic protects the LED chip from moisture thus ensuring a long life and overcoming one of the major reasons for light failure. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0 to 50 degree. The vessel must be hauled out for installation although any maintenance can be done in the water from within the hull. The light body is designed to act as a cofferdam / secondary containment for additional security. SV14 LED technical specifications Application for: Aluminum or Steel hulls –––––––––––––––––––––––––––––––––––––––––––––– Light source: High density LED array Available in: White, blue, green, red or RGB –––––––––––––––––––––––––––––––––––––––––––––– Life length: approx. 40,000 hours plus –––––––––––––––––––––––––––––––––––––––––––––– Lumens: 14,630 Max. –––––––––––––––––––––––––––––––––––––––––––––– Kelvin colour temp: 7000 –––––––––––––––––––––––––––––––––––––––––––––– Glass lens: Borosilicate glass Thickness: 12.7mm / 0.5” Diameter: 58mm / 2.3” –––––––––––––––––––––––––––––––––––––––––––––– Power supply: 90 – 295 VAC 50/60Hz 1.1 – 0.45 amps –––––––––––––––––––––––––––––––––––––––––––––– Casing material: Aluminum 5086 or Stainless Steel 316L –––––––––––––––––––––––––––––––––––––––––––––– Angles available: Flush 30 degree 38 degree 50 degree ——————————————————————— Only required between

Introduction: Congratulations on the purchase of your new weld-in LED light for STEEL/ALUMINUM hulled vessels. Underwater Lights® USA, LLC takes pride in providing well designed, high quality and thoroughly tested lights that allow you to “enhance your boating experience”. These lights can be installed in your vessel for aesthetics, to attract fish and/or for security and safety. General Information: The latest commercial grade “COB” High-Density Light Emitting Diode (LED) technology used in this light will provide robust and reliable operation under normal operating conditions when used with...

Installation: This light should be installed at minimum 250-300mm (10-12”) below the light load water line with approximately a 20° down angle by qualified/approved personnel using proper tools, welding procedures and materials. An access area of at least 75mm (3”) should be left behind the light for servicing and general ventilation. After selecting a location, cut an appropriate sized hole through the vessel hull. Note: Hole size will be defined by the specific weldin Front Flange (18) that came with the light. Caution! Check that no electrical wiring, fuel lines, oil lines, water lines etc.,...

Introduction: Congratulations on the purchase of your new thru hull LED light driver box. Underwater Lights® USA, LLC takes pride in providing well designed, high quality and thoroughly tested lights that allow you to “enhance your boating experience”. These lights can be installed in your vessel for aesthetics, to attract fish, for security and safety. Features Include: Latest control technology and electronic component construction to guarantee high levels of performance. Universal VAC input with short circuit, over current, over voltage and over temperature protections. Electrical wiring terminal...

Installation: The driver box should be mounted in a cool, dry, well ventilated and easily accessible location. Attach the driver box to a fixed bulkhead or similar secure structure using appropriate M6 fasteners with adequate space between driver boxes for proper cooling. Note: Whereas the driver box can be placed in any orientation, it is recommended that the cable strain relief connectors face down. Using marine grade 16/3 cable, run a VAC input line into the driver box and secure by way of one cable strain relief connector. Run the marine grade 18/2 cable supplied with the thru hull LED light...