DV59
3Pages

Catalog excerpts

purpose built robust underwater LED dock light designed to withstand the saltwater or freshwater environment. This marine dock light manufactured in aluminum bronze incorporates the latest LED high density chip technology with a borosilicate marine grade glass lens and GFCI protection. The underwater dock light can be mounted horizontally on any structure or simply placed on the sea, lake or pond bottom. Available in white, blue, green, red or color changing RGB. The driver box can be ordered with an attached photo cell for automatic switching at dusk. There is also an optional mounting bracket available that can be used to attach the dock light to fixed structures. Floating docks, pilings, marinas, waterside restaurants and houses –––––––––––––––––––––––––––––––––––––––––––––– Glass Lens: Clear borosilicate Thickness: 0.19” / 48mm Diameter: 4.2” / 106mm –––––––––––––––––––––––––––––––––––––––––––––– Driver: 100 – 277VAC 50/60Hz 2.0 – 0.68 Amps input range 150W output –––––––––––––––––––––––––––––––––––––––––––––– Light Source: High density LED array White, blue, green, red or color changing –––––––––––––––––––––––––––––––––––––––––––––– Lumens: 15,000 –––––––––––––––––––––––––––––––––––––––––––––– Life Length: Approx. 30,000 hours –––––––––––––––––––––––––––––––––––––––––––––– Light Dimensions: 5.9” (150mm) diameter x 1.4” (35mm) deep –––––––––––––––––––––––––––––––––––––––––––––– Driver Box 11.5” (292mm) long x 9.3” (235mm) wide Dimensions:

Open the catalog to page 1

Introduction: Congratulations on the purchase of your new LED dock light with matching driver box. Underwater Lights® USA, LLC takes pride in providing well designed, high quality and thoroughly tested lights that allow you to “enhance your boating experience”. This LED light can be installed on your dock for aesthetics, to attract fish and/or for security and safety. General Information (LED Light): The latest commercial grade “COB” High-Density Light Emitting Diode (LED) technology used in this light will provide robust and reliable operation under normal operating conditions when used...

Open the catalog to page 2

DV59 LED Light 120-230VAC Installation: Ensure that the LED light will be submerged at low tide (if applicable), then select a flat mounting surface for the light and secure by way of two Main Body (1) M8 x 1.25 x 9mm deep threaded holes or simply lay on bottom facing up. Note: An optional mounting bar is also available. Caution! Route LED light electrical cable away from any sharp edges/surfaces. Preferably, the matching driver box should be mounted in a cool, dry, well ventilated and easily accessible location. Attach the driver box to a fixed bulkhead or similar secure structure using...

Open the catalog to page 3