DV41 T  his light can be surface mounted or flush mounted using a weld-in insert in aluminum 5083 or stainless steel 316 L. It should be used for any area needing general high powered LED lighting as a flood or spot light as well as helidecks. The bolted bezel is machined stainless steel 316 L and ensures a strong exterior for exposed areas. It is available with clear lens. This light uses the best quality materials and is designed for longevity and tested for water tightness to IP66. The DV41 is available in 12 or 24 volt LED white, blue or green. DV41 technical specifications Application for: Helidecks and general deck lighting ——————————————————————— Finish: Polished stainless steel 316 L ——————————————————————— Bezel: Bolted ——————————————————————— Glass lens: Clear ——————————————————————— Power supply: 12 volt d.c - 0.30 amps 24 volt d.c - 0.17 amps ——————————————————————— Lamp: Four LED modules Available in white, blue and green ——————————————————————— Dimensions: Bezel: 3.74” / 95mm Depth: 3.5” / 88mm Cut-out: 2.5” / 64mm ——————————————————————— IP rating: 66 ——————————————————————— Options: Welded insert for flush mounting All information is subject to change without prior notice, please confirm details prior to ordering. For further technical installation information, please visit www.seavision.com 277 SW 33rd Court, Fort Lauderdale, FL 33315 USA T. 954 760 4447 Toll Free 1 866 772 0130 F. 954 525 3261 [email protected] www.seavision.com