DV30 T  his light can be surface mounted or flush mounted using a weld-in insert in aluminum 5083 or stainless steel 316 L. It should be used for high intensity functional flood lighting on decks or masts. The bezel is machined stainless steel 316 L and available bolted to ensure a strong exterior for exposed areas or screwed for less exposed areas and a cleaner / smoother finish. It is available with a clear lens. This light uses the best quality materials and is designed for longevity and tested for water tightness to IP66. DV30 is available with a 150 watt metal halide lamp in 120 or 230 volt. It is not an instant start up or re-strike, it requires approx. 2 minutes to reach its full brightness. DV30 technical specifications Finish: Polished stainless steel 316 L ——————————————————————— Bezel: Bolted, screwed ——————————————————————— Glass lens: Clear ——————————————————————— Power supply: 120 volt a.c., 230 volt a.c. ——————————————————————— Lamp: 150W metal halide ——————————————————————— Dimensions: Bezel: 6.3” / 160mm Depth: 7.4” / 187mm Cut-out: 4.9” / 125mm ——————————————————————— IP rating: 66 ——————————————————————— All information is subject to change without prior notice, please confirm details prior to ordering. For further technical installation information, please visit www.seavision.com 277 SW 33rd Court, Fort Lauderdale, FL 33315 USA T. 954 760 4447 Toll Free 1 866 772 0130 F. 954 525 3261 [email protected] www.seavision.com