*mynauticexpo

DV 24

Product catalog summary

Introduction: The Dock Vision DV24 model is a submersible light designed for underwater structures such as docks, pilings, marinas, waterside restaurants, and houses. It enhances aesthetics, security, and safety.

Technical Specifications: The DV24 is available in two configurations: a 100-watt halogen lamp and a 10-watt LED lamp. The halogen lamp offers 2800 lumens with a 3000 Kelvin color temperature and a lifespan of approximately 3,000 hours. The LED lamp provides 2300 lumens with a 4000 Kelvin color temperature and a lifespan of approximately 10,000 hours. Both configurations require a 12V AC/DC power supply, with the halogen drawing 8 amps and the LED drawing 1 amp.

Construction and Installation: The light features a gray PVC body and stainless steel mounting components. It is designed to be fastened to a flat surface using two mounting brackets. The maximum submersion depth is 6.5 feet (2 meters). Installation involves connecting the light to a suitable 12 VDC fused and switched power source and ensuring the light is submerged at low tide if applicable.

Safety and Maintenance: Always disconnect and lock-out power before servicing the light. The light's components, including the lamp and glass, are serviceable. Replacement involves unscrewing the front flange, removing the lamp spring clip, and replacing the lamp. Ensure all sealing surfaces are clean before reassembly.

Warranty: Underwater Lights® USA, LLC offers a one-year warranty against defects in workmanship and materials, excluding lamps. Misuse, abuse, improper installation, and unauthorized repairs void the warranty.

Contact Information: For technical support, contact Underwater Lights USA, LLC in Fort Lauderdale, FL, or Underwater Lights Europe Sarl in Antibes, France. Contact details include phone numbers, fax numbers, and email addresses.

Catalog excerpts

he Dock Vision DV24 model is a submersible halogen or LED light designed to be fastened to under- water structures to illuminate the water. DV24 technical specs Application for: underwater docks, pilings, marinas waterside restaurants and houses ——————————————————————— Bezel: screwed ——————————————————————— Glass Lens: clear ——————————————————————— Power Supply: 12v a.c./d.c. - 8 amps - halogen 12v a.c./d.c. - 1 amp - LED Call technical support for step down transformer option if you do not have 12V available ——————————————————————— Lamp: 100 watt halogen 10 watt LED ——————————————————————— Life Length: Approx. 3,000 hours - halogen Approx. 10,000 hours - LEDED ——————————————————————— Reflector: 45 degree wide angle flood - halogen ——————————————————————— Dimensions: Bezel: 5.6” / 142mm Depth: 3.35” / 85mm ——————————————————————— Construction: Gray PVC body components and Stainless Steel mounting components ——————————————————————— Installation: Fastened to a flat surface by way of two mounting brackets ——————————————————————— Maximum Depth: 6.5 feet / 2 meters Note: All information is subject to change without prior notice, please confirm details prior to ordering. 1881 W State Road 84, Bay 102, Fort Lauderdale, FL 33315 USA T. 954 760 4447 Toll Free 1 866 772 0130 F. 954 525 3261 [email protected] www.seavision.com

Open the catalog to page 1

Introduction: Congratulations on the purchase of your new dock light. Underwater Lights® USA, LLC takes pride in providing well designed, high quality and thoroughly tested lights that allow you to “enhance your boating experience”. These lights can be installed on your dock for aesthetics, security and safety. General Operating Information: The commercial grade Halogen lamp used in this light will provide robust and reliable operation under normal operating conditions. Call technical support for step down transformer option if you do not have 12V available. General Safety Information: This light...

Open the catalog to page 2

Installation: Ensure that the light will be submerged at low tide (if applicable), then select a flat mounting surface for the light and secure by way of two Mounting Bracket (5) holes. Set desired light illumination position then tighten fasteners (10) and (11) accordingly. Caution! Route light electrical cable away from any sharp edges. Connect light to a suitable 12 VDC fused and switched power source. Unscrew the Front Flange (2) from the Main Body (1), remove Lamp Spring Clip (3), remove Lamp (8) from Main Body (1), pass cable through Cable Strain Relief (9) and tighten, connect wire leads...

Open the catalog to page 3

DV24 Light, 12VDC LED Lamp Introduction: Congratulations on the purchase of your new LED dock light. Underwater Lights® USA, LLC takes pride in providing well designed, high quality and thoroughly tested lights that allow you to “enhance your boating experience”. These lights can be installed on your dock for aesthetics, security and safety. General Operating Information: The commercial grade LED lamp used in this light will provide robust and reliable operation under normal operating conditions. Call technical support for step down transformer option if you do not have 12V available. General...

Open the catalog to page 4

DV24 Light, 12VDC LED Lamp Installation: Ensure that the light will be submerged at low tide (if applicable), then select a flat mounting surface for the light and secure by way of two Mounting Bracket (5) holes. Set desired light illumination position then tighten fasteners (10) and (11) accordingly. Caution! Route light electrical cable away from any sharp edges. Connect light to a suitable 12 VDC fused and switched power source. Unscrew the Front Flange (2) from the Main Body (1), remove Lamp Spring Clip (3), remove Lamp (8) from Main Body (1), pass cable through Cable Strain Relief (9) and...

Open the catalog to page 5