DV23 T  his light can be surface mounted or flush mounted using a weld-in insert in aluminum 5083 or stainless steel 316 L. It should be used for any area needing general or low level lighting, such as steps, walkways and deckheads. It can also be used as a flood light if the maximum 50 watt lamp is used. The bezel is machined stainless steel 316 L and available bolted to ensure a strong exterior for exposed areas or screwed for less exposed areas and a cleaner / smoother finish. It is available with a frosted or clear lens depending on how much light is required. This light uses the best quality materials and is designed for longevity and tested for water tightness to IP66. DV23 is available with an MR16, halogen lamp maximum 50 watts in 12 or 24 volt. DV23 technical specifications Application for: Steps, walkways, deckheads and flood lights ——————————————————————— Finish: Polished stainless steel 316 L ——————————————————————— Bezel: Screwed or bolted ——————————————————————— Glass lens: Frosted or clear ——————————————————————— Power supply: 12 volt d.c./a.c. - 4.3 amps 24 volt d.c. - 2.2 amps ——————————————————————— Lamp: Halogen, maximum wattage 50 watts 12/24 volt ——————————————————————— Dimensions: Bezel: 3.7” / 95mm Depth: 4.7” / 120mm Cut-out: 2.5” / 64mm ——————————————————————— IP rating: 66 ——————————————————————— All information is subject to change without prior notice, please confirm details prior to ordering. For further technical installation information, please visit www.seavision.com 277 SW 33rd Court, Fort Lauderdale, FL 33315 USA T. 954 760 4447 Toll Free 1 866 772 0130 F. 954 525 3261 [email protected] www.seavision.com