Underwater Lights Ltd 2015
20Pages

{{requestButtons}}

Catalog excerpts

Underwater Lights Ltd 2015 - 1

underwater lights limited TM British Excellence in Lighting Product Designs and Manufacturing

Open the catalog to page 1
Underwater Lights Ltd 2015 - 2

“Don’t be fooled by imitations... if it doesn’t say ‘limited’ on the box, it’s not one of our lights.”

Open the catalog to page 2
Underwater Lights Ltd 2015 - 3

underwater lights limited Our mission is to design and manufacture high-quality lighting products using the latest LEDs and electronic components available. Our R & D has enabled us to increase the efficiency of LED drivers circuits from 82% to 94% and thermally manage the lights to enhance the lifetime of our new Qt LED range. We are the founders (1991) and only manufacturers of the Original underwater lights™ brand. Peter Urquhart, President of Underwater Lights Limited™, is proud of the fact that the company designs and manufactures all of the underwater and conventional lights at it’s...

Open the catalog to page 3
Underwater Lights Ltd 2015 - 4

STEEL & ALUMINIUM HULLS UNDERWATER LIGHTS An adjustable LED ‘through-hull’ light for welding into aluminium and steel hulls. Suitable for boats greater than 30 meters. The boat must be hauled out for installation. Maintenance of the light is carried out from inside the hull. Dry docking is not necessary. The ‘insert’ part, which is welded into the hull, can be used for LED or HID projectors. The beam angle can be internally adjusted up to 15 degrees. Lamp type: Glass lens: Lamp life: Colour temp: Hole cut-out: To suit the selected insert Wide beam, borosilicate glass Lloyds approved tested...

Open the catalog to page 4
Underwater Lights Ltd 2015 - 5

An adjustable ‘through-hull’ light for welding into aluminium and steel hulls. Suitable for boats greater than 30 meters. The boat must be hauled out for installation. Maintenance of the light is carried out from inside the hull. Dry docking is not necessary. The ‘insert’ part, which is welded into the hull, can be used for LED or HID projectors. On the ‘SA’ model, the beam angle can be internally adjusted up to 20 degrees. There is no adjustment on the ‘Fixed’ model and the maximum power is 150 watts. Lamp type: Glass lens: Borosilicate glass Lamp life: Lloyds approved / GL approvals...

Open the catalog to page 5
Underwater Lights Ltd 2015 - 6

FOR COMPOSITE HULLS UNDERWATER LIGHTS An adjustable LED ‘through-hull’ light suitable for GRP/fibre glass and timber hulls. Suitable for boats greater than 30 meters. The boat must be hauled out for installation. Maintenance of the light is carried out from inside the hull. Dry docking is not necessary. The beam angle can be internally adjusted up to 15 degrees. Lamp type: Glass lens: Lamp life: Colour temp: Hole cut-out: Wide beam, borosilicate glass Lloyds approved tested IP X8 TO 8 bar. Material: Aluminium bronze & 5083 aluminium Light output:

Open the catalog to page 6
Underwater Lights Ltd 2015 - 7

An adjustable ‘through-hull’ light for welding into aluminium and steel hulls. Suitable for boats greater than 30 meters. The boat must be hauled out for installation. Maintenance of the light is carried out from inside the hull. Dry docking is not necessary. On the ‘SA’ model, the beam angle can be internally adjusted up to 20 degrees. There is no adjustment on the ‘Fixed’ model and the maximum power is 150 watts. Lamp type: Glass lens: Borosilicate glass Lamp life: Colour temp: Lloyds approved tested IPX8 to 10 bar Material: Aluminium bronze and 5083 aluminium Light output: FOR COMPOSITE...

Open the catalog to page 7
Underwater Lights Ltd 2015 - 8

FOR COMPOSITE HULLS UNDERWATER LIGHTS An LED ‘through-hull’ light suitable for GRP/fibre glass and timber hulls. Suitable for boats up to 30 meters. The boat must be hauled out for installation. Maintenance of the light is carried out from inside the hull. Dry docking is not necessary. There are options for the LED colour and power. Lamp type: Glass lens: Lamp life: Colour temp: 7,200K cool white, rgb and other colours also available Hole cut-out: Wide beam, borosilicate glass Lloyds approved tested IP X8 TO 8 Bar. Material: Aluminium bronze & 5083 aluminium Light output:

Open the catalog to page 8
Underwater Lights Ltd 2015 - 9

Our most popular ‘through-hull’ light suitable for GRP/fibre glass and timber hulls. Suitable for boats up to 30 meters. The boat must be hauled out for installation. Maintenance of the light is carried out from inside the hull. Dry docking is not necessary. Lamp options include Xenon, Halogen and LED. The Xenon version can be fitted with a wide angle filter. Lamp types: 55W xenon bulb, 100W halogen, 20W LED Lamp life: 3000 hours xenon, 2000 hours halogen, 30,000 hours LED Colour temp: 7,000K xenon. 3000K halogen, 7,200K LED Voltage/amps: Glass lens: Borosilicate glass Lloyds approved...

Open the catalog to page 9
Underwater Lights Ltd 2015 - 10

Lighting Design impressive product portfolios has enabled it to become increasingly involved in design and lighting solutions for both interior and exterior lighting designs of superyachts. underwater lights limited™ We use Lutron dimming control systems so the lights can be programmed to suit individual requirements and allows total control of a wide variety of lighting scenarios. Over the years, we have worked closely with designers and owners to create outstanding personalized lighting design for yachts such as M.Y Solemar, M.Y Anna, M.Y Serque, M.Y Palladium and S.Y Hemisphere which...

Open the catalog to page 10
Underwater Lights Ltd 2015 - 11

Interior & Exterior constantly expands the ‘Cute in Size Big on Light’ philosophy and continues to manufacture new LED products. The Qt LED range is suitable for land, marine, residential and commercial applications. underwater lights limited™ Our continuous commitment to research and development allows you to be on the green side of power conservation but stylish in the final installation. The Qt LED range can adapt the latest inventions of the day without modifications to the light fitting. Options for LED power, colours, lenses and remote phosphor filters can be fitted to get the exact...

Open the catalog to page 11
Underwater Lights Ltd 2015 - 12

FOR INTERIORS AND EXTERIORS SMALL LED LIGHTS Small adjustable and fixed LED lights suitable for interior and exterior illumination. Qt LED 32 is a fixed side-emitting light, ideal for step, emergency and accent lighting. Qt LED 34 is an adjustable interior light, ideal for emergency and accent lighting. Qt LED 42i is a fixed down light with an integral driver. Lamp type: Tested IP 67 front and IP 44 rear Cool white, warm white, blue, green and red Bezel finish: Polished 316 stainless steel Other finishes available on request Lens finish: Hole cut-out: Light output: Standard 100 lumens, Qt...

Open the catalog to page 12

All Underwater Lights Limited catalogs and brochures

  1. QT 100

    2 Pages

  2. UL Ti MATE 75

    10 Pages

  3. QT 80

    2 Pages

  4. Marlin QT100

    2 Pages

  5. QT 130 RGBW

    5 Pages

  6. QT 100 White

    4 Pages

  7. Marlin

    2 Pages

  8. QT 80-40

    4 Pages

  9. QT 80-80

    4 Pages

  10. MarlinLED

    2 Pages

  11. Xenon 55W

    4 Pages

  12. QT 44-IS

    1 Pages

  13. QT 34

    1 Pages

  14. QT 76-3

    1 Pages

  15. QT 60-3

    1 Pages

  16. QT 44 & 44-I

    1 Pages

  17. QT 42 & 42-I

    1 Pages

  18. QT 32

    1 Pages

  19. QT 56

    1 Pages

  20. QT 75 RGB+w

    1 Pages

  21. QT 75

    1 Pages

  22. SA 250W

    1 Pages

  23. QT 130

    1 Pages

  24. Fixed 150W

    1 Pages

  25. LED 20W

    1 Pages

Archived catalogs

  1. S40211

    1 Pages

  2. S40252

    1 Pages

  3. S40520

    1 Pages