Catalogs >
Underwater Lights Limited >
UL Ti MATE 80 - 100 watt Halogen for 12/24 DC

UL Ti MATE 80 - 100 watt Halogen for 12/24 DC
1Pages

Catalog excerpts

UL Ti MATE 80 - 100 watt Halogen for 12/24 DC - 1

UL Ti MATE RANGE - MODEL NUMBER - S02655 Manufacturers of the Original I_II n I'—" '\/vx=3H i—M » |jg| |fcí Brand Marine Lighting Products since 1991 This "through-hull" submersible marine light IPX8 rated to 10 bar, is suitable for smaller The light is suitable for GRP, fibreglass and wooden hulls and must be installed below the minimum waterline. The boat must be hauled out for installation, although maintenance is carried out from inside This UL Ti MATE 80 uses a lOOw halogen lamp TECHNICAL SPECIFICATION Lamp Type - 100W Halogen Lamp Life - 2000 Hours - Colour Temp - 3000 K Glass Lens - Borosilicate glass Classification - Lloyds Approved Material - Aluminium Bronze and 5083 ALU Light Level - 750 Lumens Installation Instruction: The hole cut-out should be 61 mm. Hull thickness range 12-65 mm. Recommended distance between lights 1 to 2m. Electrical Information: Recommend only 2 lights for each power supply cable. See wiring diagram on opposite page. For additional information please visit our web site. CONNECTING WIRE BETWEEN LAMPS: AWG10 MAX 2 LAMPS 24 VOLT SUPPLY MARINE GRADE CABLE CONNECTING WIRE BETWEEN LAMPS: AWG10 MAX 2 LAMPS 12 VOLT SUPPLY MARINE GRADE CABLE

Open the catalog to page 1