Aluminium / Steel underwater lights limited Manufacturer of the original underwater lights Brand marine lighting products since 1991. 75 SA 150/250W *The UL Ti MATE 75 SA 150W-250W is a “ Weld-in Thru-Hull” underwater light with ush plus, 30 degree and 50 degree inserts for angled hull adjustment. * Never feel trapped by this weld-in fixture, the projector can be easily removed waterline when the yacht is loaded with 50% fuel and 50% water and that the light be angled 15 degrees downwards. *The internal (Super Adjustable) unit allows the beam angle to be varied from a narrow to wide beam, and to universally move the beam direction by 20 degrees from inside housing. *With complete Lloyd’s Register Approval, GL and ABS Design Appraisal on all components, the UL Ti MATE 75 SA has been installed on some of the largest and most prestigious Superyachts in the world. Borosilicate Glass Installation Installation 5083 Aluminium Weld-in 316L Stainless Steel Weld-in SpecSheet_UL75Fixed150_010115v1 Light Projector Installation Angles Flush+: White Flush+: White Typical Bulb Life Expectancy Min-Max Operating Voltage Flush+: White Flush+: White Ballast Output Control Options Physical Length of fixture Removal Space Required Total weight Cable Length Profile (height) of fixture Beam Angle Control Options apart for the best illumination. Aluminium & Steel Boat size *Distance between lights can vary from 1.5 (transom) to 5 meters (port & starboard) *We recommend that the installation of the light be a minimum 250mm below the Hull Material for servicing and upgrades without the hassle of hauling your boat. Hole Cut-out 5083 Aluminium / 316L Stainless Steel Color Color Color Max Hull plate thickness Borosilicate Glass Your Local Dealer © 2015 Underwater Lights Limited All Rights Reserved. Underwater lights limited reserves the right to change specifications without notice. The Great Dunton Forge, London Road Dunton Green, Sevenoaks, Kent TN13 2TD UK T: +44 (0) 1732 455753 • F: +44 (0) 1732 743233 E: [email protected] www.underwaterlights.com VAT NO: 556 4425 31

Aluminium / Steel underwater lights limited Manufacturer of the original underwater lights Brand marine lighting products since 1991. 75 SA 150/250W *The UL Ti MATE 75 SA 150W-250W is a “ Weld-in Thru-Hull” underwater light with ush plus, 30 degree and 50 degree inserts for angled hull adjustment. xture, the projector can be easily removed for servicing and upgrades without the hassle of hauling your boat. waterline when the yacht is loaded with 50% fuel and 50% water and that the light be angled 15 degrees downwards. *The internal (Super Adjustable) unit allows the beam angle to be varied from...

316 S.S. UL Ti MATE 75 SA-ICE ‘submersible through hull light’ ORDERING NUMBERS FLUSH - S00300-75-SA-ICE. 30 DEG - S00330-75-SA-ICE. 50 DEG -S00350-75-SA-1CE WITH 120 (Y3) / 230 (V2) VOLT BALLAST AND 150W (W2) OR 250W (V2,W1) WATT LAMP. OPERATIONAL CONDITIONS AND CONSIDERATIONS • The UL Ti MATE 75 SA is serviced from inside the hull. #Do not attempt to remove the glass lens while afloat. Allow access for maintenance and space for ventilation. •The projector must be correctly assembled with lid • Do not use the UL Ti MATE™ in dry-dock or out of water secured to the UL Ti MATE™ whilst afloat....

5083 ALU UL Ti MATE 75 SA ‘submersible through hull light’ ORDERING NUMBERS FLUSH - S00600-75-SA. 30 DEG - S00630-75-SA. 50 DEG - S00650-75-SA AITH 120 (V3) / 230 (V2) VOLT BALLAST AND 150W (W2) OR 250W (V2,W1) WATT LAMP. OPERATIONAL CONDITIONS AND CONSIDERATIONS The UL Ti MATE 75 SA is serviced from inside the hull. Allow access for maintenance and space for ventilation. Do not use the UL Ti MATE™ in dry-dock or out of water Allow a minimum of 170mm behind the cable gland for lamp replacements on 150w and 150mm behind the ignitor on 250w UL Ti MATE™ to be fitted 250mm below the yachts water line...

UL Ti MATE 75 SA ‘submersible through hull light’ OPERATIONAL CONDITIONS AND CONSIDERATIONS Stainless Steel INSTALLATION OF PROJECTOR UNIT: Unscrew the M6 nuts (position 4) and remove the projector lid with the SA assembly from the projector barrel. Using a suitable silicone grease coat the gasket and threads and screw the projector body tightly onto the insert. The projector body does not need to be removed for lamp maintainance. LAMP CHANGE: Unscrew the M6 nuts (position 4) and remove the projector lid with the SA assembly from the projector barrel. Undo the two lamp holder screws (position...

DESIGN, INSTALLATION AND OPERATION OF THE UL Ti MATE 75 SA underwater lights limited™ XQGHUZDWHU OLJKWV OLPLWHG Manufacturers of the Original underwater lights Brand Marine Lighting Products since 1991 BASIC CRITERIA All weld-ins must have a minimum depth of 250-300mm below a waterline based on a loading of 50% fuel and 50% freshwater. They can be used to a maximum depth of 150 metres. Spacing of the weld-ins: stern - 1.5 to 2.5 metres: port or starboard - 2.0 to 6.0 metres. Angle of the weld-in light beam to the waterline: 15-20 degree. There are three different angled weld-ins available to...

underwater lights limited™ Manufacturers of the Original I II 11 lerwxa! er ligl its Brand Marine Lighting Products since 1991 THE UL Ti MATE 75 SA INSTALLATION (Steel and aluminium hulls) The UL Ti MATE 75 SA welding procedures shown are typical for most installations and are for guidance purposes only. Always use a certified welder and a fire watch when welding. Protect all threads against welding, grinding and painting. Welding procedure Ref.No: Joint type: Preparation & cleaning: Parent material spec: Material thickness (mm): Outside diameter (mm): Filler metal classification: Filler metal...

UL Ti MATE RANGE - 75 SA AND 130 SA INFORMATION underwater lights limited™ BEAM ANGLE AND LUX INFORMATION DESCRIPTION The cone angle in the body restricts the width of the light beam angle. The 50 degree is 65 degrees, the flush and UL Ti MATE 130 have an angle of 100 degrees. The center of the light beam should be kept to 15 degrees down from the horizontal. Taking into account the reflector adjustment a flush body can be installed at an angle of 35 degrees to the vertical. The spherical is then adjusted to 20 degrees and then locked. This gives the required 15 degree beam angle. The flush can...