Catalogs >
Underwater Lights Limited >
UL Ti MATE 75 250watt SA for Aluminium & Steel Hulls

UL Ti MATE 75 250watt SA for Aluminium & Steel Hulls
1Pages

Catalog excerpts

UL Ti MATE 75 250watt SA for Aluminium & Steel Hulls - 1

UL Ti MATE RANGE - MODEL - UL Ti MATE 75 SA 250W underwater lights limited™ UL Ti MATE 75 SA S.S. 50 degree 220mm 124mm 27mm Order Number Flush-STEEL S00300-75-SA-ICE-V1W1 Order Number Flush-ALU S00600-75-SA-V1W1 75mm 220mm 120mm Lamp Life - 3000 Hours- Colour Temp- 7000 K 124mm Lamp Type - HSD Metal Halide 250w Voltage/Amps - 250 watt 90/265vac- 2.4/1.2A Order Number 30 deg. STEEL S00330-75-SA-ICE- V1W1 Order Number 30 deg. ALU S00630-75-SA-V1W1 105mm Material - Steel and 5083 ALU 140mm Glass Lens - Borosilicate glass Light Level - 250w 19,000 Lumens 220mm 124mm Ballast - 250 watt electronic in IP 65 Enclosure 40mm NOTEOrder Number 50 deg. STEEL S00350-75-SA-ICE-V1W1 Installation Instruction Order Number 50 deg. ALU S00650-75-SA-V1W1 The hole cut-out should be cut to suit insert angle. Maximum hull plate thickness should be 12mm for the flush and 20mm for the 30 & 50 degree. For Lamp Maintenance allow 150mm behind the ignitor. Electrical information 250w - Recommended maximum distance between ballast and projector 25m. Cable - 2 core 1mm square- Max cable diameter 6mm ( Part No S92532-1.0). For additional information please visit our web site. For sales telephone numbers visit www.underwaterlights.com underwater lights limited TECHNICAL SPECIFICATION UL Ti MATE 75 SA ALU 30 degree 120mm DESCRIPTION This is a “through-hull” submersible marine light for welding into aluminium and steel hulls. Maintenance of the light is carried out from inside the hull. Our patent pending internal SA ( Super Adjustable) unit allows the beam angle to be varied from a narrow to wide beam, and to universally move the beam direction by 20 degrees from within the projector housing. We advise that the light be installed 250mm below the minimum waterline when the yacht is loaded with 50% fuel and 50% water, and that the light be angled 15 degrees downwards. To achieve this there are 3 modelsFlush, 30 degree and 50 degree. The UL Ti MATE 75 SA has a larger aperture which increases the light output by 25%. The stainless steel model comes as standard with Ice Class Lloyds Approval and has been pressurised to 80 bar. The aluminium model is IPX8 to 10 bar. The range is also GL Approved. ™ TM Manufacturers of the Original underwater lights Brand Marine Lighting Products since 1991

Open the catalog to page 1