Catalogs >
Underwater Lights Limited >
UL Ti MATE 75 150watt SA for Aluminium & Steel Hulls

UL Ti MATE 75 150watt SA for Aluminium & Steel Hulls
1Pages

Catalog excerpts

UL Ti MATE 75 150watt SA for Aluminium & Steel Hulls - 1

UL Ti MATE RANGE - MODEL - UL Ti MATE 75 SA 150W This is a "through-hull" submersible marine light for welding into aluminium and steel hulls. Maintenance of the light is carried out from inside the hull. Our patent pending internal SA ( Super Adjustable) unit allows the beam angle to be varied from a narrow to wide beam, and to universally move the beam direction by 20 degrees from within the projector housing. We advise that the light be installed 250mm below the minimum waterline when the yacht is loaded with 50% fuel and 50% water, and that the light be angled 15 degrees downwards To achieve this there are 3 models- Flush, 30 degree and 50 degree. The UL Ti MATE 75 SA has a larger aperture which increases the light output by 25%. The stainless steel model comes as standard with Ice Class Lloyds Approval and has been pressurised to 80 bar. The aluminium model is IPX8 to 10 bar. The range is also GL Approved. TECHNICAL SPECIFICATION Lamp Type HSD Metal Halide 150w Lamp Life - 3000 Hours - Colour Temp - 7000 K Ballast -150 watt electronic in IP 65 Enclosure Glass Lens - Borosilicate glass Light Level - 150w 12,000 Lumens scher Lloyd Order Number Flush-STEEL S00300-75-SA-ICE-V2/V3W2 Order Number Flush-ALU S00600-75-SA-V2/V3W2 Order Number 30 deg. STEEL S00330-75-SA-ICE-V2/V3W2 Order Number 50 deg. STEEL S00350-75-SA-ICE-V2/V3W2 Installation Instruction: The hole cut-out should be cut to suit the insert Maximum hull plate thickness should be 12mm for the flush and 20mm for the 30 & 50 degree. For Lamp Maintenance allow 170mm behind the cable gland. Electrical Information: 150w - Recommended maximum distance between ballast and projector 10m. Cable - High temp, silicone 3 core (Part No S00111). For additional information please visit our web site.

Open the catalog to page 1