Catalogs >
Underwater Lights Limited >
UL Ti MATE 75 150watt Fixed for Aluminium & Steel Hulls

UL Ti MATE 75 150watt Fixed for Aluminium & Steel Hulls
1Pages

Catalog excerpts

UL Ti MATE 75 150watt Fixed for Aluminium & Steel Hulls - 1

UL Ti MATE RANGE - MODEL - UL Ti MATE 75 FIXED 150W underwater lights limited™ 168mm 115mm 27mm Order Number Flush-STEEL S00300-75-ICE-V2/V3W2 Order Number Flush-ALU S00600-75-V2/V3W2 TECHNICAL SPECIFICATION 75mm 168mm 120mm Lamp Life - 3000 Hours - Colour Temp - 7000 K 115mm Lamp Type - HSD Metal Halide 150w Voltage/Amps - 150 watt 120(V3)/230(V2) - 1.4/0.7.A Ballast - 150 watt electronic in IP 65 Enclosure Order Number 30 deg. STEEL S00330-75-ICE-V2/V3W2 Order Number 30 deg. ALU S00630-75-V2/V3W2 105mm Glass Lens - Borosilicate glass 168mm 115mm Light Level - 150w 12,000 Lumens 140mm Material - Steel and 5083 ALU NOTE Installation Instruction: 40mm The hole cut-out should be cut to suit the insert Order Number 50 deg. STEEL S00350-75-ICE-V2/V3W2 angle. Maximum hull plate thickness should be Order Number 50 deg. ALU S00650-75-V2/V3W2 12mm for the flush and 20mm for the 30 & 50 degree. For Lamp Maintenance allow 60mm behind the cable gland. Electrical Information: 150w - Recommended maximum distance between ballast and projector 10m. Cable - High temp. silicone 3 core (Part No S00111). For additional information please visit our web site. For sales telephone numbers visit www.underwaterlights.com underwater lights limited UL Ti MATE 75 30 degree 120mm DESCRIPTION The UL Ti MATE 75 Fixed is a “through-hull” submersible marine light for welding into aluminium and steel hulls. Maintenance of the light is carried out from inside the hull. It does not include the SA 'Super Adjustable' unit and has been introduced to compete fairly with other fixed lights on the market. The lens aperture is exactly the same as the SA to give the same maximum light output. This new light is also shorter in length to the SA unit so that it is easier to fit into those small areas. We advise that the light be installed minimum 250mm below the waterline when the yacht is loaded with 50% fuel and 50% water, and that the light be angled 15 degrees downwards. To achieve this there are 3 modelsFlush, 30 degree and 50 degree. The stainless steel model comes as standard with Ice Class Lloyds Approval and has been pressurised to 80 bar. The aluminium model is IPX8 to 10 bar. The range is also GL Approved. ™ TM Manufacturers of the Original underwater lights Brand Marine Lighting Products since 1991

Open the catalog to page 1