Catalogs >
Underwater Lights Limited >
SA 150W or 250W

SA 150W or 250W
1Pages

Catalog excerpts

UL Ti MATE RANGE - MODEL- UL Ti MATE 130 SA underwater lights limited™ Lamp Life - 3000 Hours - Colour Temp - 7000 K 222mm UL Ti MATE 130 SA-W1 (250 WATT) ORDER NUMBER-S00475-SA-V1W1 Material - Aluminium Bronze and 5083 ALU Light Level - 150w 12,000 Lumens - 250w 19,000 lms Glass Lens - Borosilicate glass NOTE UL Ti MATE 130 SA-W2 (150 WATT) Installation Instruction: ORDER NUMBER-S00475-SA-V2/V3W2 The hole cut-out should be 100 mm. For Lamp Maintenance allow 170mm behind the projector lid. Hull thickness range 12 to 120 mm. Electrical Information: 150w - Recommended maximum distance between ballast and projector 10m. 250w - Recommended maximum distance between ballast and projector 25m. Cable - 150w-250w High temp. silicone 3 core (Part No S00111, 0.75). For additional information please visit our web site. For sales telephone numbers visit www.underwaterlights.com underwater lights limited Lamp Type - MSD Metal Halide 150w or 250w TECHNICAL SPECIFICATION DESCRIPTION This is the most flexible and powerful “through-hull” submersible marine light for the large sports fish yachts and is suitable for GRP-fibreglass and wooden hulls. The design and development of the UL Ti MATE 130 SA gave the marine market their wish with the internal adjustment (SA) which allows the beam angle to be varied from a narrow to wide beam and to universally move the beam direction by 20 degrees from within the projector housing. The UL Ti MATE 130 SA has a larger aperture which increases the light output by 25%. We advise that the light be installed 250mm below the minimum waterline. The boat must be hauled out for installation, although maintenance of the light is carried out from inside the hull. The light is IPX8 to 10 bar. Manufacturers of the Original underwater lights Brand Marine Lighting Products since 1991

Open the catalog to page 1