QT 80-80
2Pages

Catalog excerpts

underwater lights limited Manufacturer of the Original underwater lightsTM Brand Marine Lighting Products Since 1991 TECHNICAL SPECIFICATION Lamp type - LED 5,500 lumen, 7,200K & Royal Blue Lamp life - 40,000 hours @ 35C Driver power supply - 11-28vdc, Power 80 watts. Body - AB2 and 5083 Aluminium Insert Lens (wide beam) - Coated Borosilicate glass Driver is integral with the light. NOTEInstallation Instruction The hole cut-out should be 61 mm. Hull thickness range 12-65mm Recommended distance between lights 1 to 2meters. Supply cable - two core - min 2.5mm sq. Length of connected cable to be kept to a minimum to prevent volt drop. Fuse protection- Positive supply cable maximum 20 amps. Maximum outlet to lights 10 amps. Visit our web site for additional wiring information Earthing instruction After the light has been installed tighten the earth screw on the securing ring sothat it bites into the screwed barrel. Check there is continuity from the earth tab to the front face of the light. This is very important to stop galvanic corrosion of the front face PLEASE REGISTER YOUR PRODUCT WARRANTY DIRECT TO WWW.REGISTER-UWL.COM For sales telephone numbers visit www.qtled.com THE QT-LED RANGE IS DESIGNED AND MANUFACTURED BY UNDERWATER LIGHTS LTD IN THE U.K. For sales and information visit WWW.QTLED.COM DESCRIPTION The QT 80-80, is a “through- hull” submersible marine light tested at front of glass to IP68 at 10 bar. The light is suitable for installation into GRP-ber-glass and timber hulls. The standard LED produces 5,500 lumens -Colour temperature of 7,200K. Other colours are available on request. The light must be installed below the minimum waterline. The boat must be out of the water for installation. Maintenance of the LED is carried out from inside the hull. CUTE ON SIZE - BIG ON LIGHT cute in size big on light

Open the catalog to page 1

underwater lights limited Manufacturer of the Original underwater lights Marine Lighting Products Since 1991 2 Description Qt 80 1:Body 2:Led Heat Sink 3:Compensating Ring 4:Securing Ring 5:Clamp ring 6:'O' Rings 7:Adustment screws 8:Earth screw TECHNICAL SPECIFICATION *Supply Voltage 11-28vdc Maximum current at 11vdc = 6 amps *LED Driver - Integral- YES *LED Cool white (5,500 lm) and Royal Blue *BODY Material - Aluminium Bronze and 5083 ALU. *LED lamp life - 20,000 hours @ 60° C EARTH SCREW ITEM 8 PLEASE REGISTER YOUR PRODUCT WARRANTY DIRECT TO WWW.REGISTER-UWL.COM For sales telephone...

Open the catalog to page 2