QT 76-3
1Pages

Catalog excerpts

76-3 cute in size big on light DESCRIPTION The Qt LED 76-3 is an interior/exterior fixed light with phosphor filter or lens. The light is suitable for up or down lighting and is also ideal as a low level light. The bezel, LED and lens is one complete unit and has an IP rating of IP 68 to 8 bar. This prevents any ingress of water and breathing which can damage the LED. The light can be fitted into an insert or screwed directly into the superstructure/deckhead. The standard 12-24vdc driver is integral with the light. Mains power and DMX drivers can be used but have to be installed remote from the light. TECHNICAL SPECIFICATION Lamp Type - Flat LED standard rated up to 1,200 LumensLED drive current -12/24 vdc/700mA Colours - Warm white or cool white standard Lens Finish - Standard borosilicate clear 5 Bezel Finish - 5083 Aluminium or 316 Stainless Steel IP Rating - Tested for index of protection IP 67 LED Driver - Standard Integral driver non dimmable Note: The hole cut- out should be 61 mm. Our standard integral driver is fitted with a heat protection senser. The Qt LED 76-3 is available with a remote phosphor filter. This is a latest technology which takes the colour change/difference of the LED out of the equation. The remote phosphor is fitted in front of the LED. So if we use the 2,700K temperature phosphor, the colour will not change for 80,000 hours. It is also claimed that there is an increase in light output of 20%. For additional information please visit our web site. For sales telephone numbers visit www.qtled.com THE QT-LED RANGE IS DESIGNED AND MANUFACTURED BY UNDERWATER LIGHTS LIMITED

Open the catalog to page 1

QT 76-3
1Pages

Catalog excerpts

All Underwater Lights Limited catalogs and brochures

Archived catalogs

QT 76-3 1Pages

Catalog excerpts

All Underwater Lights Limited catalogs and brochures

Archived catalogs

QT 76-3
1Pages