underwater lights limited TM Manufacturer of the original underwater lights ™ Brand marine lighting products since 1991. 75 HP3 cute on size big on light Hull Material Aluminium / Steel Boat Size 30 meter + Lumens . q . Max 20,000 til! SL The QT-75 LED underwater light features the smallest and brightest weld-in LED fixtures on the market with flush and 50 degree inserts for angled hull adjustment. SL Never feel trapped by this weld-in fixture the LED projector can be easily removed for servicing and upgrades without the hassle of hauling your boat. SL With a maximum 20,000 lumens of light power and its' 90 degree beam angle provides a perfect spread of light. SL the QT-75 LED is recommended for Steel and Aluminium hull yachts of 30 meter+. SL Distance between lights can vary from 1.5 (transom) to 5 meters (port & star-board)apart for the best illumination. SL With complete Lloyd's Register Approval, GL and ABS Design Appraisal on all components, the QT-75 has been installed on some of the largest and most prestigious Superyachts in the world. SL The QT-75 is a completely customisable underwater lighting solution for larger yachts. We offer a bespoke design service tailored for each individual hull. Inside the hull Control Option On/Off Switched Driver Remote Growth Resistant Lens Borosilicate Glass PROJECTOR 100 - 240 VAC Hull material Aluminium or Steel ^^^5083 Aluminium Inserts 316L Stainless Steel Inserts

^Veld-im - Aluminium ^ 5bainless 51 eel Mulls Mounting Hull Material Boat size Spacing Beam Angle Installation Angles Color White Insert Part Number QT-75-00300 -HP3W / 00600-HP3W Technical Lumens Kelvin Typical LED Life Expectancy Min-Max Operating Voltage Current / Amp draw Driver Type DriverOutput Control Options Bonding Physical Length of fixture Diameter of fixture Profile (height) of fixture Removal Space Required Total weight Driver Dimensions (LxWxH) Cable Length Hole Cut-out Material Growth Resistant Lens Color White © 2015 Underwater Lights Limited All Rights Reserved. Underwater...

underwater lights limited Manufacturer of the Original underwater lights1 M Brand Marine Lighting Products Since 1991 75 :ute on big on light “DESCRIPTION - This is a submersible through hull marine light which uses our existing standard FLUSH +, 30 degree and 50 degree insert (1) part numbers for 5083 ALU and 316 S.S inserts are below. The insert is welded into the hull. Removal of the led light is done from inside the hull by unscrewing the LED heat sink body (8). * LENS FITTING INSTRUCTIONS-Remove the blanking plate and check the insert (1) lens landing surfaces are clean and apply a suitable...

underwater lights limited Manufacturer of the Original underwater lights1 M Brand Marine Lighting Products Since 1991 big on light * DESCRIPTION - This is a submersible through hull marine light which uses our existing standard FLUSH + , 30 degree and 50 degree inserts (1) which are generic for all light projectors. Below are the part numbers for 5083 ALU and 316 S.S * Welding the inserts must carried out by an appoved welder and to the attending surveyors satisfaction.inserts. * See guidance method of welding procedure sheet. * Note that the edge of the insert must protrude 5mm through the hull...