Catalog excerpts
underwater lights limited Manufacturer of the original underwater lights Brand marine lighting products since 1991. 130-RGB+W cute on size big on light *The QT-130 RGB+W LED underwater light uses a four channel DMX driver for RGB+W colour change and switch on/off- ALL BLUE. This is the smallest and brightest weld-in LED fixtures on the market with flush and 50 degree inserts for angled hull adjustment. *Never feel trapped by this fixture the LED projector can be easily removed Thru-Hull - LED serviced from inside Mounting *With complete Lloyd’s Register Approval and ABS Design Appraisal on all components, the QT-130 has been installed on some of the largest and most prestigious Superyachts in the world. *The QT-130 is a completely customisable underwater lighting solution for larger yachts. We offer a bespoke design service tailored for each individual hull. Maintenance Inside the hull Growth Resistant Lens Borosilicate Glass Hull material Composite (GRP) Wood Technical Lumens Typical LED Life Expectancy Min-Max Operating Voltage Driver Type Driver Output Control Options Locking RIng Physical Length of fixture Profile (height) of fixture Removal Space Required Total weight Cable Length Hole Cut-out Armor Coated AB2 Bronze Growth Resistant Lens Borosilicate Glass Maximum hull thickness Installation Angles Control Option DMX-Color change Switch On & Off Driver *The QT-130 RGB+W LED is recommended for GRP and wooden hull yachts of 20 meter+. *Distance between lights can vary from 1.5 (transom) to 5 meters (port & starboard)apart for CUTE on size BIG on light Available in Blue and RGB+W. Beam Angle Part Number *With its’ 90 degree beam angle, the fixture provides a perfect spread of light. Boat size for servicing and upgrades without the hassle of hauling your boat. Hull Material Your Local Dealer © 2015 Underwater Lights Limited All Rights Reserved. Underwater lights limited reserves the right to change specifications without notice. The Great Dunton Forge, London Road Dunton Green, Sevenoaks, Kent TN13 2TD UK T: +44 (0) 1732 455753 • F: +44 (0) 1732 743233 E: uwl@underwaterlights.com www.underwaterlights.com VAT NO: 556 4425 31
Open the catalog to page 1underwater lights limited Manufacturer of the original underwater lights Brand marine lighting products since 1991. 130-RGB+W cute on size big on light *The QT-130 RGB+W LED underwater light uses a four channel DMX driver for RGB+W colour change and dimming fixed colours - WHITE and BLUE. This is the smallest and brightest weld-in LED fixtures on the market with flush and 50 degree inserts for angled hull adjustment. *Never feel trapped by this fixture the LED projector can be easily removed Thru-Hull - LED serviced from inside Mounting *With complete Lloyd’s Register Approval and ABS...
Open the catalog to page 2underwater lights limited Manufacturer of the Original underwater lightsTM Brand Marine Lighting Products Since 1991 130 * FITTING THE BODY- Qualif ied/Approved personnel must be used to carry out installation. Cut and prepare a 4 inch / 101mm clearance hole for the body (1). Coat the fange of the body and the area around the hole with 3M 4200FC or Sikaflex 291sealant then slide the body into the hole. From the inside fit the compensating ring (2) and screw the securing ring (3) up “hand tight”. Adjust the screws (5) so the compensating ring is fush to the hull and check the sealant has...
Open the catalog to page 3underwater lights limited Manufacturer of the Original underwater lights™ Brand Marine Lighting Products Since 1991 ©tLEDDMX AND LIGHT CONNECTIONCONNECTION FOR RGB+W SINGLE LIGHTS * Shown below is a schematic diagram of the connections for the DMX underwater lights. * Every light has three meters of cable and a IP 68 plug f tted. The aluminium driver enclosure ( AK 162) has an IP 68 socket f tted for plug and play. * DMX connection- All drivers are connected in series. The DMX control is connected at one end and the driver at the end of the series has to be terminated. It is advisable to...
Open the catalog to page 4underwater lights limited Manufacturer of the Original underwater lights Marine Lighting Products Since 1991 DMX AND LIGHT CONNECTION ELECTRICAL INFORMATION * Shown below is a simple connection diagram for the DMX Controller, the Six channel splitter, Four channel drive and the RGB+W underwater lights. * Single light connection- Every light has three meters of cable and a IP 68 plug fitted. The aluminium driver enclosure has a IP 68 socket fitted for plug and play. These are shown below as ‘Device’ * DMX connection- All Devices are connected in series to a six channel splitter. Each channel...
Open the catalog to page 5All Underwater Lights Limited catalogs and brochures
-
QT 100
2 Pages
-
UL Ti MATE 75 - Fixed
6 Pages
-
UL Ti MATE 75
10 Pages
-
QT 130 HP3W & RGBW
2 Pages
-
QT 80
2 Pages
-
Marlin QT100
2 Pages
-
Underwater Lights - 2016
27 Pages
-
QT 75 HP 3rd Gen
4 Pages
-
QT 130 HP 3rd Gen
3 Pages
-
UL Ti MATE 130
4 Pages
-
QT100 RGBW & Blue
4 Pages
-
QT 100 White
4 Pages
-
Marlin
2 Pages
-
QT 80-40
4 Pages
-
QT 80-80
4 Pages
-
MarlinLED
2 Pages
-
Xenon 55W
4 Pages
-
UL Ti MATE 80 20 WATT LED
5 Pages
-
QT 76-8 Helideck
1 Pages
-
QT 44-IS
1 Pages
-
QT 34
1 Pages
-
QT 88 Swimming Pool
1 Pages
-
QT 76-3
1 Pages
-
QT 60-3
1 Pages
-
QT 44 & 44-I
1 Pages
-
QT 42 & 42-I
1 Pages
-
QT 32
1 Pages
-
QT 56
1 Pages
-
QT 75 RGB+w
1 Pages
-
QT 75
1 Pages
-
SA 250W
1 Pages
-
QT 130 RGB + W
1 Pages
-
QT 130
1 Pages
-
Fixed 150W
1 Pages
-
SA 150W or 250W
1 Pages
-
LED 20W
1 Pages
-
Underwater Lights Ltd 2015
20 Pages
-
UL Ti MATE 130 Fixed
1 Pages
-
QTLED 75 HP & RGBW
2 Pages
-
QT LED 75 Standard
2 Pages
-
Marlin Surface Mount LED
2 Pages
-
QTLED 130 HP & RGBW
2 Pages
-
QTLED 130 Standard
2 Pages
-
UL Ti MATE 75 SA 150/250W
1 Pages
-
Xenon (Extended) 55W
2 Pages
-
UL Ti MATE 130 SA - 00475-
1 Pages
-
Underwater Lights Limited
40 Pages
Archived catalogs
-
S40211
1 Pages
-
S40252
1 Pages
-
S40520
1 Pages
-
UL Ti MATE 75 WT- 250W/150W
1 Pages
-
PAR 30 Flood Lights
1 Pages