underwater lights limited Manufacturer of the Original underwater lightsTM Brand Marine Lighting Products Since 1991 TECHNICAL SPECIFICATION Lamp type - LED 18,500 lumen, 6,500K and RGB+W Lamp life - 40,000 hours @ 35C Driver power supply - 110/240 vac, Power 130 watts. Body - 5083 Aluminium & AB2 Insert Lens - Coated Borosilicate glass Driver output - 4 channel 36vdc/1.4amps per channel DMX Control - For dimming and colour change Driver and DMX supplied in Aluminium IP 67 Enclosure NOTEInstallation Instruction: The hole cut-out should be 101mm. Hull thickness range 12mm to120 mm. For Lamp Maintenance allow 170mm behind the cover. Electrical Information: Driver - Driver must be tted minimum 60cm above the tank top with good space for ventilation. Cable - The QT 130 HP is supplied with a 3 meters of cable with a plug ready to connect to the socket in the driver (IP 67) enclosure. For additional information please visit our web site. VIEW OF PLUG AND PLAY CONNECTION REMOVE BOTH RINGS TO INSTALL PLEASE REGISTER YOUR PRODUCT WARRANTY DIRECT TO WWW.REGISTER-UWL.COM For sales telephone numbers visit www.qtled.com THE QT-LED RANGE IS DESIGNED AND MANUFACTURED BY UNDERWATER LIGHTS LTD IN THE U.K. For sales and information visit WWW.QTLED.COM DESCRIPTION The Qt LED 130 HP is a ush “through-hull” submersible marine light for large yachts and is designed for GRP-Fibreglass and wooden hulls. We advise that the light be installed 250mm below the waterline. Maintenance of the light is carried out from inside the hull. Dry docking is not necessary. The QT LED 130 HP comes fully assembled and ready for installation when the securing and compensating rings are removed. The LED is easily removed and replaced from the projector barrel. The LED has a wide beam of around 87 degree . The high powered LED (18,500 lm) is available in cool white 6,500K and four channel RGB+W. CUTE ON SIZE - BIG ON LIGHT cute on size big on light