Catalogs >
Underwater Lights Limited >
QT 130 HP 3rd Gen

QT 130 HP 3rd Gen
3Pages

Catalog excerpts

underwater lights limited Manufacturer of the original underwater lights Brand marine lighting products since 1991. 130 HP3 cute on size big on light *The QT-130 LED underwater light features the smallest and brightest LED fixture Thru-Hull - LED serviced from inside on the market for composite and wooden hulls. *Never feel trapped by this fixture the LED projector can be easily removed Beam Angle apart for the best illumination. *With complete Lloyd’s Register Approval and ABS Design Appraisal on all components, the QT-130 has been installed on some of the largest and most prestigious Superyachts in the world. *The QT-130 is a completely customisable underwater lighting solution for larger yachts. We offer a bespoke design service tailored for each individual hull. Maintenance Inside the hull On / Off Switched Driver Remote Growth Resistant Lens Borosilicate Glass Technical Lumens Typical LED Life Expectancy Min-Max Operating Voltage Driver Type Driver Output Control Options Locking Ring Physical Length of fixture Profile (height) of fixture Removal Space Required Total weight Cable Length Hole Cut-out Armor Coated AB2 Bronze Growth Resistant Lens Borosilicate Glass Maximum Hull Thickness Power 110 - 240 VAC Hull material Composite (GRP) Wood Installation Angles Control Option *The QT-130 LED is recommended for GRP and wooden hull yachts of 20 meter+. *Distance between lights can vary from 1.5 (transom) to 5 meters (port & starboard) CUTE on size BIG on light angle provides a perfect spread of light. Available in BLUE *With a maximum 20,000 lumens of cool white light power and its’ 90 degree beam Part Number Boat size for servicing and upgrades without the hassle of hauling your boat. Hull Material Your Local Dealer © 2015 Underwater Lights Limited All Rights Reserved. Underwater lights limited reserves the right to change specifications without notice. The Great Dunton Forge, London Road Dunton Green, Sevenoaks, Kent TN13 2TD UK T: +44 (0) 1732 455753 • F: +44 (0) 1732 743233 E: uwl@underwaterlights.com www.underwaterlights.com VAT NO: 556 4425 31

Open the catalog to page 1

underwater lights limited Manufacturer of the original underwater lights Brand marine lighting products since 1991. cute on size big on light *The QT-130 LED underwater light features the smallest and brightest LED fixture Thru-Hull - LED serviced from inside on the market for composite and wooden hulls. *Never feel trapped by this fixture the LED projector can be easily removed Hull Material Boat size apart for the best illumination. *With complete Lloyd’s Register Approval and ABS Design Appraisal on all components, the QT-130 has been installed on some of the largest and most prestigious...

Open the catalog to page 2

underwater lights limited Manufacturer of the Original underwater lightsTM Brand Marine Lighting Products Since 1991 130 * FITTING THE BODY- Qualiﬁed/Approved personnel must be used to carry out installation. Cut and prepare a 4 inch / 101mm clearance hole for the body (1). Coat the ﬂange of the body and the area around the hole with 3M 4200FC or Sikaﬂex291 sealant then slide the body into the hole. From the inside ﬁt the compensating ring (2) and screw the securing ring (3) up “hand tight”. Adjust the screws (5) so the compensating ring is ﬂush to the hull and check the sealant has ﬂowed...

Open the catalog to page 3