UL Ti MATE RANGE - MODEL NUMBER - S02860 underwater lights limited™ TECHNICAL SPECIFICATION Lamp Type - 7 x single 210 lumen LED122mm Lamp Life - 30,000 Hours - Colour Temp - 7200K Classification - Lloyds Approved Glass Lens - Borosilicate glass Material - Aluminium Bronze and 5083 ALU Light Output - 1,400 Lumens NOTEInstallation Instruction The hole cut-out should be 61 mm. Hull thickness range 12-65mm Recommended distance between lights 1 to 2meters. Electrical Information See diagram opposite. The 12/24vdc driver is integral, just connect the red wire to the +VE and black wire to the -VE 12/24vdc power supply. Maximum number of lights on one supply cable TWO For additional information please visit our web site. - VE BLACK + VE RED POWER SUPPLY 12 VOLTS DRIVER 24 VOLTS DRIVER MAXIMUM 2 LAMPS ON THE SAME SUPPLY CABLE. THE 12-24 VDC DRIVER CAN OPERATE BETWEEN MIN 10 VDC 10.5 (-5%) 28.5 (+ 5%) MAX 30 VDC Max 2 lamps on the same supply cable For sales telephone numbers visit www.underwaterlights.com underwater lights limited DESCRIPTION The UL Ti MATE 80, 20W LED is a “through- hull” submersible marine light rated IP68 to 10 bar. The light is suitable for small boats and can be installed into GRP-fiberglass and wooden hulls. It must be installed below the minimum waterline. The boat must be hauled out for installation, although maintenance of the LED is carried out from inside the hull. The LEDs are available in blue, red, green or white. The LED driver is integral with the light. Manufacturers of the Original underwater lights Brand Marine Lighting Products since 1991